Kimya tesislerinde, regular inspection of dispersers is an important step to ensure the normal operation and safe operation of the equipment. The following are the common inspection contents of dispersers in chemical plants:

External Inspection:
Check the appearance of the disperser to make sure there is no obvious physical damage or corrosion.

Kabloları inceleyin, cables and connectors to ensure they are intact and that there are no loose or exposed wires.

Electrical System:
Check the power cords and sockets to make sure the electrical connection is reliable, and check that the fuses and circuit breakers are working properly.

Motorun çalışma durumunu kontrol edin, including parameters such as current, voltage and temperature, to ensure that it is within normal limits.

Kimya tesisindeki dağıtıcının denetim içerikleri

Mekanik parçalar:
Check the wear of the mixing shaft, cutting tool or agitator, and replace or repair it in time if necessary.

Check the working condition of bearings and seals to ensure normal lubrication and sealing.

Check drivetrains such as belts, chains and gear drives to ensure they are tight and functioning properly.

Sıcaklık ve basınç:
Doğru sıcaklık kontrolünü sağlamak için sıcaklık sensörünün ve kontrol cihazının çalışma durumunu kontrol edin.

Check the working status of the pressure sensor and safety valve to ensure that the pressure is within the safe range.

Kimya tesisindeki dağıtıcının denetim içerikleri

Borular ve vanalar:
Check the connection of the inlet and outlet pipe of the disperser to ensure that there is no leakage or loosening.

Check valve operation and sealing performance to ensure proper operation and flow control.

Emniyet araçları:
Acil durumlarda elektriğin hızlı bir şekilde kesilebilmesini sağlamak için acil durdurma butonunun ve emniyet anahtarının çalışma durumunu kontrol edin.

Patlamaya dayanıklı ekipmanın çalışma durumunu kontrol edin (uygunsa) düzgün çalışmasını ve etkinliğini sağlamak için.

Please note that this is only a general inspection content, spesifik inceleme öğeleri ve sıklığı dağıtıcının modeline göre değişiklik gösterebilir, üretici önerileri, Proses koşulları ve güvenlik gereksinimleri. Öyleyse, it is recommended that inspections be carried out according to the user’s manual of the equipment and the instructions provided by the manufacturer, and that standard operating procedures and safety regulations of chemical plants be followed. Eğer gerekliyse, consult a professional engineer or equipment manufacturer for more detailed and customized inspection recommendations.