7006-51A-2 Lamp holder anti-accident contact gauge

7006-51A-2 Lamp holder anti-accident contact gauge

Tanım
Sorgu

Tanım

Lamp holder anti-accident contact gauge

IEC 60061 7006-51A-2 Lamp holder Anti-accidental contact specification E27
E27 Lamp holder gauge name
Standardı karşılayın: IEC 60061; GB1483.1
Product category:
E27 Lamp holder gauge Pass Gauge 7006-27B-1
E27 Screw cap gauge Stop 7006-28A-1E27 Cap solder Height gauge 7006-27C-1
E27 Screw cap Contact performance Gauge 7006-50-1
E27 Lamp holder Anti-accidental contact gauge (elektrik çarpmasına karşı) 7006-51A-2

The plunger of the gauge is shown in the test position. When the plunger is at rest, surface W shall be retracted deeper than surface V.

D	26.55	+0.0/-0.02	N	32	+0.0/-0.02
F	27.2	+0.05/-0.0	O	34	+0.0/-0.2
G	32	+0.02/-0.0	P	6	±0,1
H	14	±0,1	Q	3	±0,1
J	36	+0.2/-0.0	sen	10	±0,1
k	28.4	+0.0/-0.02	R	2.5	+0.5/-0.0
M	30.8	+0.0/-0.02

IEC 60061 7006-51A-2 Lamp holder Anti-accidental contact specification E27
Amaç:

To check protection against accidental contact during insertion of caps E27 on finished lamps.

IEC 60061 7006-51A-2 Lamp holder Anti-accidental contact specification E27
Test yapmak :

The shape of the lamp with regard to protection against accidental contact is assumed to be correct if, when the lamp is pushed as far as possible into the gauge, surface W does not protrude beyond surface V.