LR-A001-B Dokunmatik Ekran Erime Akış İndeksi Test Cihazı MFR MVR Testi
- Tanım
- Sorgu
Tanım
LR-A001-B Dokunmatik Ekran Erime Akış İndeksi Test Cihazı MFR MVR Testi
Tanım:
Used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, flor plastik, nylon and other engineering plastics, can also be applied to polyethylene (PE), polistiren (PS), polipropilen (PP), ABS reçinesi, poliformaldehit (POM), polikarbonat (bilgisayar) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastik ürünler, such as petroleum and chemical industry and related colleges and universities, scientific research units, and the commodity inspection department.
Standart:
GB/T3682-2000 《Determination of melt flow rate and melt volume flow rate of thermoplastics》
ISO 1133:1997《Determination of melt flow rate and melt volume flow rate of thermoplastics》
ASTM D1238 《Standard Test Method for Determination of flow rate of Thermoplastic Melt by extruded plasticizer》
Test Methods:MFR+MVR Methods
LR-A001-B Dokunmatik Ekran Erime Akış İndeksi Test Cihazı MFR MVR Testi
Ekran modu: 7-inch touch screen controller
Modeli | LR-A001-B |
Namlu parametreleri | İç delik 9,55±0,025 mm |
Piston parametreleri | Piston kafası: 9.475±0,015 mm |
Outlet length | 8.000±0.025mm |
Parametreler | Ekstrüzyon deliği 1=2,095±0,005mm |
Sıcaklık parametresi | Akıllı sıcaklık kontrol cihazı ile, dört çift önemli sıcaklık ayarı kontrolü ile, PID parametreleri otomatik olarak ayarlanabilir, ±'ya kadar hassasiyet 0.1 derece santigrat |
Sıcaklık aralığı | Room Temperature~450degree centigrade |
Sıcaklık dalgalanması | ±0.2 ℃ |
Temperature uniformity | ±1°C |
Sıcaklık görüntüleme çözünürlüğü | 0.1°C |
Ekran çözünürlüğü | 0.1°C |
Maksimum tüketim | < 600W |
Time display resolution | 0.1S |
Ağırlık parametreleri aşağıdaki gibidir: | |
Ağırlık doğruluğu | ±%0,5 |
Temel yapılandırma
| 0,325 kg |
1,2 kg | |
2,16 kg | |
3,8 kg | |
5kg | |
10kg | |
12,5 kg | |
Y 21,6 kg | |
Pozisyon algılama | |
Yukarı ve aşağı döngü mesafesi | 30mm |
Kontrol hassasiyeti | ± 0,1 mm |
Test akış kontrolü | |
Malzemenin kesilme süreleri | 0~10 kez |
Malzeme kesme aralığı | 0~999s(referans tablosunu ayarla 2) |
Kontrol akışı, ayarlanan sıcaklığa uçuculuk olmadan ulaşır | |
Namlu sıcaklığı süresi | 15 dk.. |
Malzeme kurulacak | 1 dk.. |
Malzeme numunesi sıcaklığının geri kazanılma süresi | 4 dk.. |
Ciltleyici ayarlandığında | 1dk. |
Output mode | Micro-automatic print output |
Cut material methods | The hand automatic cut into one body |
Test load | Eight sets of weights |
Güç | AC220V±10% 50/60HZ |