LR-G003 Konik Mandrel Test Cihazı
Conical Mandrel Tester
The varying mandrel diameter (3.2 mm – 38.1 mm) stretches a coating
through a gradient of distension, allowing precise determination of adhesion characteristics.
- Panels up to 20 cm and 1.6 mm thickness can be tested
- Durable sturdy stainless steel mandrel
- Tanım
- Sorgu
Tanım
Conical Mandrel Tester
The varying mandrel diameter (3.2 mm – 38.1 mm) stretches a coating
through a gradient of distension, allowing precise determination of adhesion characteristics.
- Panels up to 20 cm and 1.6 mm thickness can be tested
- Durable sturdy stainless steel mandrel
Procedure
– Cover test panel with paper between mandrel and draw bar and clamp the probe.
– Fold the panel around the cone by using the manually operated arm.
– Bend uniformly at 180 degrees within 15 saniye.
– Remove panel and examine the coating for cracks.
– Mark the point at which the cracking stops.
– Measure the distance from the farthest end of the crack to the small end of the mandrel.
– Appropriate calibration curves also permit determination of the elongation values of the paint film.
Conical Mandrel Tester
Standartlar
ASTM D 522 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ISO 6860 Boyalar ve vernikler – bükme testi (conical mandrel)
Conical Mandrel Tester
Ordering & Teknik özellikler
Cat.No. | Boyutlar | Net ağırlığı | Shipping weight |
2696 | 340×120×300 mm | 7.5 kilogram | 10 kilogram |