Plaka yöntemi termal iletkenlik ölçerin geniş alan test örneği gibi birçok avantajı vardır., birden fazla tür (tek malzeme veya kompozit malzeme) test material, yüksek hassasiyetli sıcaklık kontrolü, güvenilir ve istikrarlı performans, yüksek derecede kontrol otomasyonu, easy operation and so on. The thermal conductivity test principle of the plate method is an absolute measurement method and does not require any calibration standards. The instrument is produced according to relevant standards, the test is accurate, the operation is simple, is a very ideal test tool for the development and research of low thermal conductivity materials.

Test scope:
Tek malzeme: foam (flat surface insulation material, çarşaf), poliüretan, fenolik, idrar aldehit, mineral yün (cam yünü, kaya yünü, mineral yün), çimento duvarı.
Kompozit malzemeler: cam takviyeli kompozit levha CRC, çimento polistiren levha, sandviç beton, FRP panel composite board, kağıt petek kurulu.

Plaka yöntemi termal iletkenlik ölçer, düşük termal iletkenliğe sahip malzemeleri geliştirmek ve araştırmak için bir test aracıdır

Instrument features:
1, the surface temperature is accurate and uniform. Tasarımın içinde, a large area of whole purple copper plate is used as a temperature control plate to improve the consistency of the surface temperature of the tested sample.
2. Gelişmiş kontrol sistemi. Can quickly and stably control the temperature.
3. Dost insan-makine arayüzü. Cold and hot plate temperatures and heat flow power can be visually displayed by large color LCD screen.
4. Basit operasyon. Soğuk plaka pnömatik modu benimser, and automatically closes after the specimen is installed in place.
5, intelligent data processing. Yüksek düzeyde otomatikleştirilmiş bilgisayar veri iletişimi ve rapor işleme sistemi, flat plate heat exchanger with computer communication interface, gerçek zamanlı ekran sıcaklık eğrisi.
6, automatically generate test report and print. Built-in test recording, data processing and reporting formats.

Plaka yöntemi termal iletkenlik ölçer, düşük termal iletkenliğe sahip malzemeleri geliştirmek ve araştırmak için bir test aracıdır

The thermal conductivity of materials is an important parameter index to study the physical properties of materials. In aviation, atomic energy, building materials, non-metallic materials and other industrial sectors, it is required to predict or actually measure the thermal conductivity of relevant materials. The test method is divided into steady-state method and dynamic test method. The plate method is based on the principle of heat protection plate method and the relevant national standard requirements, and the corresponding improvement has been made. The test work is automatically completed by the computer, and the state points are digitally displayed. The test can also be completed manually, which meets the high precision test requirements of the material testing research department for the thermal conductivity of materials.