Halojen Nem Analizörü, bir numunedeki nem içeriğini ölçmek için yaygın olarak kullanılan bir araçtır..

The following is a detailed introduction to the halogen moisture meter:

Nasıl çalışır
The working principle of the halogen moisture meter is based on halogen lamp technology. The instrument uses heat energy radiated by heating and a halogen lamp to evaporate the water in the sample and measure the amount of water evaporated, thereby determining the moisture content in the sample. The light emitted by halogen lamps has high energy and can accelerate the evaporation process of water.

Halojen nem ölçeri anlayın, bu yazıyı okumanız yeterli

Operasyon yöntemi
Genel olarak, the operation of moisture measurement using halogen moisture meter is as follows:

Prepare the instrument: Connect the halogen moisture meter to the power supply and turn on the switch to ensure the instrument is ready.

örnek hazırlama: Place the sample to be tested in the sample container and record the mass or volume of the sample.

Placement of the sample: Place the container containing the sample in the measuring chamber or sample compartment of the instrument, ensuring good contact with the instrument.

Parametreleri ayarla: according to the characteristics of the sample, set the appropriate heating temperature, heating time and other parameters.

Start measurement: By pressing the start button or initiating the corresponding operation of the measurement process, the instrument will perform the heating and moisture measurements.

Display results: After the measurement is completed, the instrument will display the results of the measured moisture content.

Halojen nem ölçeri anlayın, bu yazıyı okumanız yeterli

Notlar
The following matters should be noted when using halogen moisture meter:

Operate and handle the instrument correctly according to instrument requirements and guidelines to ensure accurate measurement results.

Operasyon sırasında, follow the safe operation guide of the instrument, especially the safety precautions related to the heating components.

The sample container should be clean, dry, and in good contact with the instrument to ensure the accuracy of the measurement.

Attention needs to be paid to the nature and condition of the samples, and some samples may need to be pretreated or other measurement methods selected.

Halojen nem ölçeri anlayın, bu yazıyı okumanız yeterli

Field of application
Halogen moisture meters are widely used in many fields, including but not limited to:

Food and beverage industry: used to measure the moisture content of food, grain, coffee, tea, dairy products, fruit and vegetable samples.

Chemical and pharmaceutical industry: used to measure the moisture content of chemical reagents, ilaçlar, apis, solvents and other samples.

Building materials and pulp industry: used to measure moisture content in concrete, alçıtaşı, kağıt, pulp and other materials.

Environmental monitoring: used to measure moisture content in soil, wastewater, waste and other samples.

Halojen nem ölçeri anlayın, bu yazıyı okumanız yeterli

Referans standardı
The use of halogen moisture meter can refer to the following standards or methods:

ASTM D644: Standard Test Method for Moisture Content of Paper and Paperboard by Oven Drying.

ISO 287: Kağıt ve karton — Determination of moisture content of a lot — Oven drying method.

GB/T 1037: Determination of moisture content of paper, pano, and pulp.

AOAC Official Method 934.01: Moisture in Foods.

USP General Chapter < 921> Water Determination.

It should be noted that the specific reference standards may vary depending on the samples tested and the required industry regulations. Öyleyse, in specific applications, the applicable standards or methods should be selected according to the tested samples and industry requirements.