У застосуванні сушильних стелажів, the UV aging test box can be used to simulate the long-term exposure of drying racks to UV radiation in outdoor environments and evaluate their weather resistance and durability.

Meet industry standards
ISO 4892-2: ISO 4892-2 стандарт, published by the International Organization for Standardization (ISO), covers methods for weatherability testing of plastic materials using ultraviolet light and can be applied to plastic parts in clothes hangers.

Конкретні випадки застосування:

Weatherability assessment: Drying racks are usually exposed to outdoor environments and are affected by ultraviolet light, висока температура, вологість та інші фактори. The use of UV aging test chamber can simulate these external conditions, through a long time of UV irradiation and high temperature wet heat cycle and other tests, to evaluate the drying rack in different climatic conditions of the weather resistance and anti-aging performance.

Оцінка стійкості кольору: Color stability of drying racks is an important indicator, especially for drying racks made of colored plastics. Ultraviolet aging test box can simulate ultraviolet light irradiation, test the color change of drying rack, оцінити стабільність кольору та ефективність захисту від вицвітання.

Застосування коробки для тестування УФ-старіння в сушарці

Тест на механічні властивості: UV aging test box can also be used to test the mechanical properties of clothes hanger, such as carrying capacity, wind resistance and so on. By performing mechanical property tests under UV light, it is possible to evaluate the mechanical stability and durability of the drying rack under long-term UV radiation.

Performing the above tests through the UV aging test chamber can help manufacturers and designers evaluate key indicators such as weather resistance, color stability, and mechanical properties of drying rack materials, thereby optimizing product design and material selection to improve the quality and durability of drying racks.

Застосування коробки для тестування УФ-старіння в сушарці

Метод випробування
When using UV aging test chamber for drying rack test, the following steps can be carried out:

Sample Preparation: Prepare a certain number and size of drying rack samples to ensure that they represent the material and design to be tested.

Set test parameters: according to the test requirements and standards, встановити параметри камери для випробувань УФ-старіння, including the radiation intensity of the UV light source, температура, humidity and test time. These parameters are adjusted according to the specific test criteria and the required test results.

Install the samples: Встановіть зразки полиць для одягу в випробувальну камеру, ensuring that they are in the proper position and posture. Під час встановлення, attention should be paid to avoid occlusion and mutual influence between samples.

Почніть тест: start the UV aging test chamber and let the UV light source illuminate the sample. В той самий час, температура та вологість у випробувальній камері контролюються для імітації фактичних умов навколишнього середовища. Встановіть необхідний час тесту відповідно до вимог тесту.

Моніторинг і запис: Changes in the clothes rack samples were monitored and recorded regularly during the testing. Це може включати зміни кольору, observation of surface quality, measurement of bending or tortuous properties, тощо. Professional test equipment and measurement tools can be used for accurate data recording.

Застосування коробки для тестування УФ-старіння в сушарці

Аналіз та оцінка: Based on the test results, the performance of the drying rack samples was analyzed and evaluated. Compare the data before and after the test to observe the change trend and the degree of performance loss. According to the purpose of the test, judge whether the weather resistance, стійкість кольору і механічні властивості зразка відповідають вимогам.

Звіт про результати: A test report is generated based on the test results, describing in detail the testing process, the methodology and parameters employed, and the analysis and evaluation of the test results. The report can include pictures, charts, and data tables to visually show the results of the test.

The specific test methods and procedures may vary according to different standards, requirements and equipment. тому, before conducting the test, the relevant test standards and operation manuals should be carefully studied, and the operation should be carried out as required. В додаток, in order to ensure the accuracy and reliability of test results, reasonable sample selection, sample installation and control of test conditions are also very important.