Основні характеристики будівельного гідроізоляційного покриття та метод його виявлення
Architectural waterproofing coatings are coatings that are applied to the surfaces of buildings to improve their waterproofing properties and are usually composed of polymers, пігменти, and additives. They can be applied to waterproof layers of various buildings, such as roofs, walls, basements, and water tanks, among others. With excellent water resistance, weather resistance, and UV resistance, architectural waterproofing coatings can protect buildings from water, вологи, and UV damage and improve the service life and reliability of buildings.
Продуктивність виявлення
| Назва вистави | Обладнання для використання |
|---|---|
| Thickness of thickness | Товщиномір |
| Сила натягу | Машина для випробувань на розтяг |
| Подовження при розриві | Машина для випробувань на розтяг |
| Водотривкість | Водооборотна установка |
| Стійкість до погоди | Ultraviolet aging test chamber |
| УФ стійкість | Ultraviolet aging test chamber |
| Міцність зв'язку | Shear strength tester |
| Coefficient of expansion | Thermal expansion coefficient tester |
Основні характеристики будівельного гідроізоляційного покриття та метод його виявлення
Testing steps:
Thickness: Use a thickness gauge to measure the thickness of the building waterproof coating, record the measured value and calculate the average value.
Tensile strength and elongation at break: tensile tests were carried out using a tensile testing machine, test data were recorded and tensile strength and elongation at break were calculated.
Водотривкість: A water circulation device is used to place the building waterproof paint in water, record the time and observe the change of the coating.
Weather resistance and UV resistance: Using UV aging test chamber to simulate solar radiation and atmospheric environment, observe the change of building waterproof coating.
Міцність зчеплення: Shear tests were performed using a shear strength tester, test data were recorded and bond strength was calculated.
Expansion coefficient: The thermal expansion coefficient tester was used to measure the expansion coefficient of the building waterproof coating, and the measured value was recorded and the average value was calculated.