опис
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
Стандарт дизайну:
GB11158 | Технічний стан високотемпературної випробувальної камери |
GB10589-89 | Технічний стан низькотемпературної випробувальної камери |
GB10592-89 | Технічний стан високотемпературної випробувальної камери |
GB/T10586-89 | Технічний стан камери для випробування вологого тепла |
GB/T2423.1-2001 | Методи випробувань камери для випробувань при низькій температурі |
GB/T2423.2-2001 | Методи випробувань у високотемпературній камері |
GB/T2423.3-93 | Методи випробувальної камери для випробування вологим теплом |
GB/T2423.4-93 | Методи випробування з перемінною вологістю та теплом |
GB/T2423.22-2001 | Методи випробувань на зміну температури |
IEC60068-2-1.1990 | Методи випробувань камери для випробувань при низькій температурі |
IEC60068-2-2.1974 | Методи випробувань у високотемпературній камері |
GJB150.3 | Методи високотемпературних випробувань |
GJB150.4 | Методи низькотемпературних випробувань |
GJB150.9 | Методи випробувань на вологе тепло |
60068-2-1
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
Використання:
Це обладнання може імітувати різні умови середовища. Це підходить для перевірки продуктивності матеріалу, наприклад, стійкі до тепла, протистояти сухому,стійкі до вологи та холоду. Це може визначити продуктивність матеріалу.
36L Benchtop Programmable Environmental Temperature and Humidity Test Chamber
Специфікація
1. Пункт 2. Модель | Constant Temperature and humidity test chamber 36Л |
3. Function | It simulates the products in the chamber where the climate condition of different temperature and humidity, such as high-low operation and storage, temperature cycling, high-low temperature and high-low humidity, moisture condensation etc. to check its adaptability and changing performance. It’s required to conform to international regulation (IEC, ВІН, GB, MIL…) to reach the consistency (including test schedule, condition, метод) under the international standard. |
4. Зразок application | The chamber applies to: compatibility test for store, transportation and application of electric, electronic products, unit components, parts and other materials under high or low temperature. The following samples are prohibited to be tested and stored: – Inflammable , explosive and other volatile substances; – Corrosive substance; – Biont; – Strong electromagnetic emission source. |
5. Обсяг, розмір & вага |
5.1. Обсяг 5.2. Internal size 5.3. Exterior size 5.4. вага | 36Л В 350 x H300 x D350mm W900 x H760 x D920mm 170КГ |
6. Performance |
6.1. Test condition | Температура:+25℃, Вологість: ≤85%, no samples in the chamber |
6.2. Метод випробування | GB/T 5170.2-1996 Temperature test chamber GB/T5170.5-1996 Temperature and humidity test chamber (only temperature and humidity) |
6.3. Температурний діапазон | -20℃→+150℃ (регульований) |
6.4. Коливання температури | ±0,5 ℃ |
6.5. Temperature accuracy distribution | ±2.0℃ |
6.6. Діапазон вологості | 30%~98%R.H (temperature at 20℃-85℃) |
6.7. Humid. fluctuation | ±2.5%R.H. |
6.8. Humidity accuracy distribution | ±3.0%. |
6.9. Heat-up time | -20℃ → +150℃ Heat up for 2-4.0℃/min |
6.10. Cooling time | +150℃→ -20℃ Cooling for 0.7-1.0℃/min |
6.11. Load condition | Testing space is not more than 3/4 of the total space, no heating |
6.12. Sample holder | Stainless steel punching stencil |
6.13. Relative humidity and temperature control range (refer to fig.) | |
6.14. Meet the technical standards | GB/T 2423.1-2001 Test A: Low temperature test method GB/T 2423.2-2001 Test B: High temperature test method GJB 150.3-1986 High temperature test GJB 150.4-1986 Low temperature test IEC68-2-1 Test A: Холодний IEC68-2-2 Test B: Dry heat GB11158 “Technical Conditions for High Temperature Test Chamber ” GB10586-1 “Technical conditions for Damp heat test chamber ” GB/T 2423.2 “Basic environmental testing procedures for electric and electronic products B: High temperature test method”. GB/T 2423.3 “Basic environmental testing procedures for electric and electronic products Ca: Constant damp heat testing method” etc. |