Машина для тестування індексу текучості розплаву MFR MVR
- опис
- Запит
опис
Машина для тестування індексу текучості розплаву MFR MVR
опис:
This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, також можна наносити на поліетилен (PE), полістирол (PS), поліпропілен (пп), ABS resin, polyformaldehyde (POM), polycarbonate (ПК) resin with lower melting temperature, наприклад тест на пластик, широко використовується у виробництві пластмас, пластикові вироби, petrochemical industry and related colleges and universities.
Машина для тестування індексу текучості розплаву MFR MVR
Стандартний:
GB/T3682-2018,ISO1133-2011, ASTM1238-13
Машина для тестування індексу текучості розплаву MFR MVR
Product Character:
1.More paragraphs (3) temperature control method, three groups of platinum resistance sensor, the three heating jacket separate temperature control, high accuracy intelligent PID control, ramp rate the heating speed is adjustable
2.Resolution temperature was 0.1 ℃, the temperature fluctuation of not more than 0.5 ℃ within 24 години, the displacement sensor resolution is 0.001 мм.
Temperature and temperature protection device
3.Hand automatic cutting material, can be arbitrary set blanking time (0 ~ 999), blanking times (0 ~ 999)
4.Test can choose quality standard, or volume method, two test methods or simultaneously, and can calculate flow rate ratio.Both methods start testing when the piston rod moves to a certain location.
5.Can be set up in 240 секунд (GB3682 regulations) material preheat second countdown, after the end of the countdown, farmar automatically loaded, loaded to interval start automatic cutting, can also set the American standard (ASTM) preheating time, тощо.
6.Built-in many plastic material melt index test conditions, convenient customer used to be obtained at any time, reduce the tedious work, and storing the last test conditions and results
The internal microtyping machine is convenient for printing and testing data
7.High precision touch screen controller, 7 inch touch screen, can be stored and print test conditions and data recently, test print menu Settings include test time (the default), the material name, умови тестування (температура, weight weight, blanking intervals), test results data.
8.Reserved RS232 interface or USB interface to connect computers, can through the computer control instrument operation and to save test data transmission to the computer,
9.Can manually loading weight or by stepping motor drives the ball screw rotation in order to achieve the purpose of automatic control at the top of the load weight increase or decrease
Test Methods:MFR +MVR Methods
Display Mode:English color touch screen display
Специфікація
Модель | LR-A001-C |
Параметри ствола | Inner hole 9.550±0.005mm length 163mm |
Pistons head parameters | Головка поршня: 9.474±0.005mm |
Piston rod diameter | 8.94мм |
Mold length | 8.000±0.025mm |
Mold nominal inner diameter | 2.0955±0.0051mm
|
Half die length | 4.000±0.025mm |
Half die nominal inner diameter | 1.050±0.005mm |
Температурний параметр | З інтелектуальним приладом контролю температури, з чотирма парами значного контролю налаштування температури, Параметри ПІД можуть бути встановлені автоматично, точність до ± 0.1 градус Цельсія |
Температурний діапазон | Room Temperature~500degree centigrade |
Коливання температури | ±0.2 ℃ |
Temperature uniformity | ±1℃ |
Temperature display resolution | 0.1℃ |
Роздільна здатність дисплея | 0.1℃ |
Максимальне споживання | < 600В |
Time display resolution | 0.1с |
Вагові параметри наступні: | |
Точність ваги | ±0,5% |
Базова конфігурація
| А 0,325 кг |
B 1,2 кг | |
C 2,16 кг | |
D 3,8 кг | |
E 5 кг | |
Ж 10 кг | |
G 12,5 кг | |
H 21,6 кг | |
Виявлення позиції | |
Відстань петлі вгору та вниз | 30мм |
Точність контролю | ± 0,1 мм |
Контроль тестового потоку | |
Часи розкрою матеріалу | 0~10 разів |
Інтервал різання матеріалу | 0~999с(встановити опорну таблицю 2) |
Контрольний потік досягає встановленої температури без випаровування | |
Час температури бочки | 15 хв. |
Встановити матеріал | 1 хв. |
Час відновлення температури зразка матеріалу | 4 хв. |
Коли в’яжучий матеріал встановлений | 1хв |
Output mode | Micro-automatic print output |
Cut material methods | The hand automatic cut into one body |
Test load | Eight sets of weights |
потужність | AC220V±10% 50/60HZ |