意义及用途

5.1 The function of these test methods is to determine the percentage of adhesive and reverse-reflected optical or non-reverse-reflected particles in a thermoplastic pavement marking composition, as defined by the applicable specific thermoplastic pavement marking manufacturing specification. Subsequent samples, due to ashing, can be used later to test for the presence of titanium dioxide, lead chromate and possibly organic pigments.

ASTM D4797-2017 白色和黄色热塑性路面标记重量分析的标准测试方法

步 1: 范围

1.1 These test methods include procedures for gravimetric analysis of adhesives and hydrochloric acid (HCL) insoluble particles in white and yellow thermoplastic pavement markings. HCL insoluble particles may be reverse-reflecting optics, such as glass beads or some other type of reverse-reflecting optics, or non-reverse-reflecting particles, such as silica sand, or any combination of two or more of these materials.

1.2 Where there is a mixture of two or more HCL insoluble substances, the standard does not address the physical separation and individual quantification of each component. Instead, it requires the user to visually evaluate the HCL insoluble material (obtained from following this test method) and report the type of material present.

1.3 This standard is not intended to address the measurement of titanium dioxide or lead chromate pigments (after ashing) detailed in test methods D1394 and D126.

1.4 This standard attempts to address the interference of organic pigments with adhesive results.

1.5 Profiling programs are displayed in the following order:

ASTM D4797-2017 白色和黄色热塑性路面标记重量分析的标准测试方法

1.6 以 SI 单位表示的值应被视为标准值. 括号内的数值仅供参考.

1.7 本标准并非旨在解决所有安全问题, 如果有的话, 与其使用相关. 本标准的使用者有责任建立适当的安全机制, 健康和环境实践，并在使用前确定监管限制的适用性.

1.8 该国际标准基于国际公认的标准化原则 “关于国际标准制定原则的决定, 指南和建议” 世界贸易组织技术性贸易壁垒委员会发布 (技术性贸易壁垒) 委员会.