意义和用途

3.1 喷水清洗 (SSPC-TR2 / 国家ACE 6G 198; SSPC-SP 5 (WAB)/出生WAB-1; SSPC-SP 10 (WAB)/诞生WAB-2; SSPC-SP 6 (WAB)/NACE WAB-3; SSPC-SP 14 (WAB)/NACE WAB-8); SSPC-SP 7 (WAB)/NACE WAB-4 or not, (SSPC-SP WJ-1 / NACE WJ-1; SSPC-SP WJ-2 / NACE WJ-2; SSPC-SP WJ-3 / NACE WJ- 3; SSPC-SP WJ-4 / NACE WJ-4) abrasive, which can cause flash rust under certain environmental conditions. Inhibitors are used to prevent flash rust during drying and before coating. The inhibitor or the reaction product of the inhibitor on the substrate becomes part of the coating system. Coating properties may be affected by inhibitors. Soluble contaminants or unreacted inhibitors beneath the coating may cause premature failure.

3.2 The user or illustrator needs to determine the specific test method and exposure conditions to be used. Some of the referenced test methods may not be applicable to all types of coatings.

ASTM D5367-16 “表面涂层评估的标准实施规程采用抑制剂进行处理，以防止钢在水或水/磨料喷砂后出现闪锈.

范围

1.1 This practice includes procedures for assessing the compatibility of coatings to coatings used to prevent rust on steel prior to coating.

1.2 Inhibitors can be used with or without abrasive in combination with a water-sprayed cleaning surface treatment.

1.3 The paint manufacturer should be consulted to ensure the compatibility of the inhibitor with the paint.

1.4 本标准并非旨在解决所有安全问题, 如果有的话, 与其使用相关. Users of this standard are responsible for establishing appropriate safety and health practices and determining the applicability of regulatory restrictions prior to use.