国际标准化组织 14446-1999 “油漆和清漆粘合剂工业粘度测定和硝酸纤维素溶液的分类”

前言
国际标准化组织 (国际标准化组织) 是国家标准机构的全球联盟 (ISO成员机构). 国际标准的制定通常通过ISO技术委员会进行. 每个对已成立技术委员会的主题感兴趣的成员机构都有权在该委员会中派代表参加. 与 ISO 联络的国际政府和非政府组织也参与了这项工作. ISO 与国际电工委员会密切合作 (国际电工委员会) 关于电工标准化的所有问题.

国际标准是按照第 2 部分给出的规则起草的。 3 ISO/IEC 指令的.

技术委员会通过的国际标准草案将分发给成员机构进行投票. 作为国际标准的出版至少需要获得批准 75% 成员机构的数量.

国际标准ISO 14446 由ISO/TC技术委员会制定 35, 油漆和清漆, 小组委员会SC 10, Test Methods for Paints and varnishes Adhesives.

Annex A forms the normative part of this international standard.

1 范围
This standard specifies the method for determining the viscosity of industrial nitrate cellulose (commonly known as nitrocellulose), whose nitrogen content can vary between 10.7% (大量的) 和 12.6% (大量的), depending on the type.

It also gives A classification system for industrial cellulose nitrate solutions (see annex A) based on viscosity measurements made using this method. Using standard procedures results in “标准” types and avoids classification differences, which may be caused by the many ways of determining viscosity and the wide variety of solvents available.

国际标准化组织 14446-1999 “油漆和清漆粘合剂工业粘度测定和硝酸纤维素溶液的分类”

2 规范性引用文件
The following normative documents contain provisions which, 在此引用, constitute the provisions of this International standard. 对于注明日期的参考文献, no subsequent revisions or amendments to these publications will apply. 然而, Parties to agreements based on this International Standard are encouraged to investigate the possibility of applying new versions of the following normative documents. 对于未注明日期的参考文献, a new version of the normative document referred to applies. Members of ISO and IEC maintain a register of international standards currently in force.

国际标准化组织 760:1978, Determination of water – 卡尔费休法 (一般方法).

国际标准化组织 2811-1:1997, 油漆和清漆. 密度的测定 – 部分 1: specific gravity bottle method.

国际标准化组织 2811-2:1997, 油漆和清漆. 密度的测定 – 部分 2: 浸没 (暴跌) 方法.

国际标准化组织 2811-3-1997, 油漆和清漆. 密度的测定 – 部分 3: 振荡法.

国际标准化组织 12058-1:1997, 塑料. Use a falling ball viscometer to measure viscosity. 部分 1: Inclined tube method.

国际标准化组织 15528:– 1), 油漆和清漆 — 采样.

仅标准信息部分是公开的. 查看完整内容, 需要通过官方渠道购买标准.

分享这个帖子