前言
国际标准化组织 (国际标准化组织) 是国家标准机构的全球联盟 (ISO成员机构). 国际标准的制定通常通过ISO技术委员会进行. 每个对已成立技术委员会的主题感兴趣的成员机构都有权在该委员会中派代表参加. 与 ISO 联络的国际政府和非政府组织也参与了这项工作. ISO 与国际电工委员会密切合作 (国际电工委员会) 关于电工标准化的所有问题.

用于开发本文件的程序以及用于进一步维护的程序在第 1 部分中进行了描述。 1 ISO/IEC 指令的. 尤其, 注意不同类型的 ISO 文件所需的不同批准标准. This document has been drafted in accordance with the editing rules in Part 2 ISO/IEC 指令的 (请参阅 iso.org/directives).

请注意，本文档的某些内容可能受专利权保护. ISO 不负责识别任何或所有此类专利. Details of any patent rights identified during the preparation of the document will be in the introduction and/or list of patent claims received by ISO (参见 iso.org/patents).

Any trade names used in this document are information provided for the convenience of the user and do not constitute an endorsement.

自主性, related standards and conformity assessment related ISO specific and express the meaning of terminology as well as in relevant ISO technical barriers to trade (技术性贸易壁垒) 坚持世界贸易组织原则 (世贸组织) 信息, 请参考以下网址:iso.org/iso/foreword.html.

This document has been prepared by Technical Committee ISO/TC 107 (Metallic and Other Inorganic Coatings).

国际标准化组织 21164-2018 金属和其他无机涂料 – 工程用直流磁控溅射银镀层 – 涂层附着力的测量

介绍
Silver coatings are often specified for their excellent conductivity in optical, electronic and electrical engineering applications. The minimum thickness of silver coatings for optical and electronic applications ranges from 0.1 μm to 1.0μm, depending on the type of application and customer requirements.

The methods for testing adhesion of Ag coatings deposited by DC magnetron sputtering given in this document are considered to have adequate accuracy when used correctly with specimens suitable for a particular method.

The method chosen shall be the one that is expected to produce the most reliable results taking into account the thickness of the coating, the shape and size of the coating material, the substrate and its roughness, ETC.

Warnings This document requires the use of substances and/or procedures that may be hazardous to health if appropriate safety measures are not taken. This document does not address any health hazards, safety or environmental issues associated with its use. The user of this document is responsible for establishing appropriate health, safety and environmentally acceptable practices.

国际标准化组织 21164-2018 金属和其他无机涂料 – 工程用直流磁控溅射银镀层 – 涂层附着力的测量

1 范围
This document specifies the method of testing the coating adhesion of sputtered silver coatings for electrical, 电子的, optical and other engineering applications. Engineering applications are defined as applications in which the coating is essentially used for non-decorative purposes.

Although the appearance and suitability of sputtered silver coatings depend on the condition of the substrate, this document does not specify the condition, finish or surface roughness of the substrate prior to deposition. 所以, it is the Buyer’s responsibility to specify the surface finish and roughness of the base material to meet the product requirements.

This document specifies the test methods for coatings on sheet and flat objects. 然而, it does not apply to coatings on threads, strips or wires in non-manufactured forms.

2 规范性引用文件

文中引用下列文件，其部分或全部内容构成本文件的要求. 对于注明日期的参考文献, 仅引用版本适用. 对于未注明日期的参考文献, the latest version of the reference (包括任何修订) 适用.

国际标准化组织 2064, Metallic and other Inorganic coatings – 与厚度测量相关的定义和实践

国际标准化组织 2080, Metallic and other Inorganic coatings — Surface treatments, metallic and other inorganic coatings — 词汇

国际标准化组织 4521, 金属和其他无机涂料 – electrolytic silver and silver alloy coatings for engineering use – 规格及测试方法

3 术语和定义
就本文件而言, ISO 中给出的术语和定义 2064, 国际标准化组织 2080 和ISO 4521 并适用以下规定.

3.1 Sputtering

Deposition of material (金属) on a surface by spraying particles of material (金属) from a target using fast ions

3.2 附着力

The state in which the coating and the underlying substrate are held together by interfacial forces, which may include valence or interlocking forces or both

仅标准信息部分是公开的. 查看完整内容, 需要通过官方渠道购买标准.