以下是实验室分散机的基本用途:

1. 准备工作:
检查设备是否完好, the power cable is securely connected, and the power supply is normal.

Prepare necessary reagents and samples, and prepare other experimental equipment and equipment as required.

2. 设置参数:
According to the experimental requirements, set the appropriate parameters of the dispersing machine, 比如速度, 时间, 温度, ETC. Ensure that the parameters selected are appropriate for the sample and reagent to be processed.

3. Sample treatment:
Add the samples to be processed into the container of the disperser, taking care not to exceed the maximum capacity limit of the container.

Auxiliary solvents, dissolvers or other reagents are added as needed to achieve the desired dispersion or emulsification effect.

实验室分散机的使用方法

4. Start the dispersing machine:
Turn on the power switch of the dispersing machine, and press the start button or rotate the control knob to start the device. Ensure smooth operation of equipment without abnormal sound or vibration.

5. Dispersion or emulsification:
Select the appropriate agitator or disperser according to the operating instructions of the equipment and install it on the equipment.

Adjust the speed and time of the equipment according to the instructions of the equipment to begin the dispersion or emulsification process.

In the process of operation, pay attention to the sample changes to ensure that it achieves the desired dispersion or emulsification effect.

6. 结束操作:
After the dispersing or emulsifying process, turn off the power switch of the dispersing machine to stop the operation of the equipment.

Carefully remove the sample container, taking care to avoid touching hot surfaces or other hot spots.

Perform follow-up procedures on samples, such as sampling, 分析或其他实验操作, 按要求.

清洁和保养:
分散机容器、搅拌器的清洗，保证设备的卫生和正常运行.

定期检查设备状况, 比如电线, 密封件, 轴承, ETC。, 并根据需要进行维护或更换.

请注意，以上步骤仅适用于一般实验室分散机使用. 具体过程可能因设备型号而异, 制造商的说明, 及实验要求. 所以, 在操作实验室分散机之前, 请务必仔细阅读设备的用户手册和制造商提供的说明, 并遵守实验室安全规定和操作程序.