- 描述
- 询问
描述
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
目的
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
笔记
This test should not be used on parts made of very hard materials such as chain mail.
原则
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
根据标准: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
技术参数
| 负载重量 | 5N±0.05N | 样本量 | 100mm*80mm |
| Blade size | Japan OLFA tungsten alloy steel blade Hardness 740HV-800HV φ45±0.5mm, thickness 0.3mm | Cutting stroke | 50毫米 |
| Cutting speed | 10厘米/秒(blade sine speed) | 柜台 | 1-99999 |
| 电源 | AC220V±10% 50Hz | 仪器尺寸 | 550×400×250(长×宽×高) |
| The weight of the instrument | 40公斤 |
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
配置清单:
主持人, 1 acrylic protective cover, 1 电源线, 2 刀片, 10 pieces of filter paper, 1 roll of aluminum foil (20 米), 5 pieces of cotton canvas.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
目的
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load.
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
笔记
This test should not be used on parts made of very hard materials such as chain mail.
原则
The sample is cut by a counter rotating circular blade which reciprocates under a specified load
根据标准: The tester is designed and produced according to GB 24541-2009, EN388 standard
Cutting tester for protective gloves,Uppers Cutting Resistance Tester
目的
This machine is used to test the strength of protective gloves and upper protection area. The cutting resistance of gloves or uppers is measured by cutting samples with a rotating circular cutter under a specified load
