- 描述
- 询问
描述
IEC60061 E26不走规 灯座规
IEC60061-3 7006-29L-4 Not Go Gauge E26 Lamp holder gauge
E26/E26d灯头量规
产品名称 :E26灯座规技术标准 :国标 1483/ 国际电工委员会 60061-3
E26 Lamp holder gauge classification
| 序列号 | 压力表类型 | 仪表名称 | 标准图号 |
| 1 | E26 Lamp holder | go gauge | 7006-27D-3 |
| 2 | E26 Lamp holder | Not Go Gauge | 7006-29L-4 |
| 3 | E26 Lamp holder | 接触性能计 (美国标准) | 7006-29-3 |
| 4 | E26 Lamp holder | contact performance gauge(JIS gauge) | 7006-29-3 |
| 5 | E26 Lamp holder | Anti-accidental contact gauge (防触电 | 7006-29A2 |
| 参考 | Dimension/(毫米) | Tolerance/(毫米) | Limit after wear(毫米) |
| d | 26.41 | +0.03/-0 | 26.45 |
| d1 | 24.72 | +0.03/-0 | 24.76 |
| L | 6 | ±0.1 | |
| 磷 | 3.629 | – | |
| r | 1.191 | – | |
| T1 | 19.56 | +0.0/-0.03 | |
| V | 12.7 | ±0.15 |
The shape part of the edge of the thread shall be broken with radius of 0.2mm to 0.3mm.
IEC60061-3 7006-29L-4 Not Go Gauge E26 Lamp holder gauge
目的:
To check the maximum dimensions of the screw thread and dimension T1 minimum of caps on finished lamps.
IEC60061-3 7006-29L-4 Not Go Gauge E26 Lamp holder gauge
测试 :
When the cap on a finished lamp has been screwed into the gauge as far as it will go, the center contact shall be co-planar with, or project beyond, surface X.
IEC60061-3 7006-29L-4 Not Go Gauge E26 Lamp holder gauge
E26/E26d灯头量规
产品名称 :E26灯座规技术标准 :国标 1483/ 国际电工委员会 60061-3
E26 Lamp holder gauge classification
The shape part of the edge of the thread shall be broken with radius of 0.2mm to 0.3mm.
IEC60061-3 7006-29L-4 Not Go Gauge E26 Lamp holder gauge
目的:
To check the maximum dimensions of the screw thread and dimension T1 minimum of caps on finished lamps.
IEC60061-3 7006-29L-4 Not Go Gauge E26 Lamp holder gauge
测试 :
When the cap on a finished lamp has been screwed into the gauge as far as it will go, the center contact shall be co-planar with, or project beyond, surface X.
