- 描述
- 询问
描述
JB-5C/6C ISO5436简易操作轮廓粗糙度仪
磷roduct brief 我介绍:
JB-5C/6C Profile roughness tester is a precision measuring instrument which is widely used in machining, 汽车, bearing, machine tools, touch tools, precision hardware, optical processing and other industries.The instrument drive box provides high-precision linear reference guide rail with different specifications of 100, 120 和 150 毫米. The sensor moves in a straight line along the guide rail.So we can set up X coordinate measurement units.The differential inductance sensors are used in Z axis from 10 mm to 20mm.The drive box can be adjusted horizontally ±10 degrees by the horizontal adjusting button.And can carry on the horizontal and the vertical direction movement respectively through the control box’s operation key or the software interface.The sample shape can be scaled up to any size.The measurement software under WINDOWS XP operating system is intuitive and convenient to operate.Rich function, 高精准度, 稳定性好, and easy to print out and save files.
The roughness and contour shape parameters of various precision mechanical parts can be measured.The fitting method can be used to evaluate the radius, Angle treatment, circle treatment, point line treatment, Angle and distance from the center of two circles.Thus, shape parameters such as straightness, convexity, groove center distance, inclination, groove depth, groove width, groove edge distance, vertical distance from groove center distance, horizontal distance and step can be measured.
The performance of the instrument can be compared with that of foreign imported instruments. The instrument has reached the international standard in all aspects. The instrument conforms to the national standards GB/ t3505-2000, GB/ t6062-2001, GB/ t10610-1998, and the international standards ISO5436, ISO11562,ISO4287.See technical parameters for detailed indicators.
JB-5C/6C ISO5436简易操作轮廓粗糙度仪
规格:
| 类型 | JB-5C | JB-6C |
| roughness test: | ||
| measuring parameter | 拉,Rz,保留时间,RS,RSm,RP,右室,最大吸收率,Rq,D,铂,Lr,Ln and Rmr(Tp)Curve Curve etc. | 拉,Rz,保留时间,RS,RSm,RP,右室,最大吸收率,Rq,RPK,Rpv,瑞克,Mr1,Mr2,D,铂,Lr,Ln and Rmr (T p) Curve etc. |
| Roughness profile graphics magnification | 10,20,50,100,200,500,1000,2000,5000,10000,20000,50000,100000,200000,500000 or automatic | |
| Roughness measuring range | 0.01 – 30 µm above | |
| Sampling length | L: 0.08 ,0.25, 0.8, 2.5,8 毫米 | |
| To evaluate the length | Ln: 1L, 2L, 3L, 4L, 5L To choose | |
| Instrument evaluation sampling | 100000 dot | |
| resolution ratio | 0.001 微米 | |
| 示值误差 | ± (5 %+4纳米) | |
| Measurement repeatability | ± 3 % | |
| Measure the maximum height of the workpiece | 370毫米 | |
| Contour measurement range: | |||
| range of measurement: | X:100毫米 Z:10毫米 | X:120mm or 150mm (JB-6CA) Z:20毫米 | |
| Shape measurement function | element:Point, 线, 顶部, valley, intersection, 接触, center line.Analysis: coordinate difference, 距离, 角度, 半径, contour, ETC. | ||
| 传感器范围 | 1毫米(roughness),10毫米(outline) | 1毫米(roughness), 20毫米(outline) | |
| Shape graphics magnification | 1,2,3,4,5,10,20,50,100,120,150,200,250,300,350,400,450,500 | ||
| Ratio of range to resolution | 65,536:1 | ||
| Axial measurement range | 100毫米 | 120毫米 | |
| Radius error | 0.1%-1.0% | ||
| Straightness measurement error | 1μm/40mm | ||
| sample rate | 0.25 mm/sec,0.5 mm/sec,1mm/sec | ||
| Lifting speed | 2mm/second | ||
| Up and down, left and right | X:100mm Z: 370毫米 | X: 120mm Z: 370毫米 | |
| The length of the needle | 18mm and 6.5mm | 30mm and 12 毫米 | |
| Tip radius of stylus | 10微米 | ||
| The Angle of the tip of the stylus | Long needle 16 度, short needle 30 度 | ||
| dynamometry | 0.01-0.02氮 | ||
| Instrument power supply | 220 VAC ±10%, 50赫兹 |
| Marble table size | 700mm×400mm×100mm weight :150公斤 |
| Instruments and gross weight | 200公斤 |
