描述

Ring Crush Tester

介绍

Microcomputer compression strength tester is a touch screen controlled paper and board compression strength tester, which is used to test paper ring pressure strength, cardboard edge pressure strength, corrugated board bonding strength, corrugated board compression strength and so on.Paper mills are usually used to test the RCT of paper with a thickness of 0.15 ~ 1.00mm.Cardboard, carton factories and carton enterprises are commonly used to test corrugated board edge compression strength (ECT), flat compression strength (FCT), bonding strength (PAT) and flat compression strength (CMT) with diameter less than 60mm.This instrument is an ideal auxiliary test tool for paper making enterprises, paperboard manufacturers, carton manufacturers, carton users and quality supervision and inspection departments.

测试标准

国标/T 2679.8 determination of ring compression strength of paper and paperboard(sample area: 152.4×12.7mm)

国标/T 6546 “determination of corrugated board edge pressure strength”;(sample area: 25毫米×100毫米)

国标/T 6548 “determination of adhesive strength of corrugated board”;(sample area: 25mm×80mm)

国标/T 2679.6 determination of flat compression strength of corrugated base paper;(sample area: 64.5厘米²/32.2厘米²)

Ring Crush Tester

规格

Product type:Touched screen control with test curve.

测量范围: 5 ~ 5000N

Edge crush strength:0-50000牛/米

Ring crush strength:32.89KN/M

准确性:≤1%

解决: 0.01 氮,0.01公斤,0.01LB

test speed: 12.5毫米/分钟

测试区:Up Down press plate area>100cm2 Height:80毫米

Test mode:RCT,ECT,PAT,FCT

Save data:can save 100groups data

打印输出:热敏纸打印输出

外形尺寸:320*300*520毫米

重量:50公斤

功能:数据保存和查看, 错误数据删除, 数据打印, 参数设定, 设备校准, 实时数据监控, 测试完成重置, 测试效果控制, 限制保护, ETC.

应用: 纸盒, 纸, 瓦楞纸板, 彩盒, 塑料中空板, small carton, small paper tube

Ring Crush Tester

RCT – Ring Crush Test : A sample of paper or cardboard is placed in a ring formation and subjected to a successively increasing edge compression force until it breaks,then the resistance force is measured. The RCT value is the force divided by the sample’s length.

适用标准：GB/T2679.8 APPITA/AS 1301.407s, PAPTAC D.33P, 从 53134, 国际标准化组织 12192, JIS P8126, 扫描P 34, 塔皮特 822

CLT – Concora Liner Test measures the same way as RCT, but is carried out in another type of sample holder.

CCT – 瓦楞纸压碎测试: 样品在加热的瓦楞辊之间形成瓦楞. 将样品固定在适合波纹形状的特殊夹具中. 平行于瓦楞原纸顶部施加并测量压碎力. CCT值是样品断裂前所能承受的最大力.

适用标准：扫描P 42, 塔皮特 843

CMT – Concora 培养基测试: 样品在加热的瓦楞辊之间形成瓦楞. 凹槽由压敏胶带固定并固定在一起, 从而仿制单面瓦楞纸板. 破碎力垂直施加在纸张上 ,然后测量断裂力. CMT值是样品断裂前能承受的最大力.

适用标准：GB/T2679.6 APPITA/AS 1301.434s, 帕塔克D.24P, 从 53143, 在那里面 7263, 国际标准化组织 7263, 扫描P 27, 塔皮特 809

ECT – Edge Crush Test: A sample of corrugated board is subjected to increasing force, parallel to the flutes, until it breaks. The ECT value is the breaking force divided by the sample’s width.

适用标准：GB/T6546 APPITA/AS 1301.444s, 从 53149, 在那里面 3037, FEFCO No.8, 国际标准化组织 3037, 国际标准化组织 13821, 扫描P 33, 塔皮特 811, T 823,T 838, 时间 839

FCT – Flat Crush Test : A sample of corrugated board is subjected to vertical increasing force until the fluting breaks. The FCT value is the force divided by the sample’s surface area.

Flat Crush Hardness – A measurement of the corrugated board’s yield point in a FCT sample. Equivalent to the first ‘peak’.

Flat Crush Energy – The total energy absorbed during a FCT measurement.

适用标准：GB/T22874 APPITA/AS 1301.429s, 在 23035, FEFCO No.6, 国际标准化组织, 3035, 扫描P 32, 塔皮特 825

PAT – Pin Adhesion Test：Adhesion resistance is the maximum force required to separate the linerboard from the fluting with the help of a special sample holder.

适用标准：GB/T6548 APPITA/AS 1301.430s, 塔皮特 821

SQT – Score Quality Test：A sample is placed on a U-shaped support and pressed by a thin strip, exactly above a score, until it breaks. The ratio between the scored and un-scored values gives the score ratio.

适用标准：塔皮特 829

CL—Constant Load Test：The test load, speed and time are input to test the deformation of the sample under constant load and specified time.

DL—Deformation Load Test：Input deformation and test speed, test the maximum load of the sample.

attachment

Sample cutter