- 描述
- 询问
描述
LR-WAW-300D微机控制电液伺服万能试验机
1.Profile
The main engine is four columns, two bars, oil cylinder, and the stretch space is above the host, and the compression and bending test space is between the lower beam of the host and the table.Measurement and control system using digital multi-channel closed loop control system, with functions of three closed loop, which can make the stress, strain and displacement closed loop control mode, and can make an impact switch, the speed of its stress and strain rate completely accord with national standard GB/T228.1-2010 and other metal tensile test standard requirements.
LR-WAW-300D微机控制电液伺服万能试验机
| Max force（kN） | 300 |
| Measure Force Range | 2%-100% |
| 试验力相对误差值 | ＜ The value for ±1% |
| 试验力分辨率 | 最大负荷 1/300000 |
| 变形相对误差值 | ＜ The value for ±1% |
| Deformation of the resolution | The biggest deformation 1/300000 |
| The largest tensile test space（mm） | 600 |
| 压缩空间（mm） | 500 |
| The piston stroke(毫米) | 200 |
| Column spacing（mm） | 490 |
| Circular specimen clamping range（mm） | Φ6-Φ40 |
| The specimen thickness clamping（mm） | 0-15 |
| Flat specimen clamping width（mm） | 75 |
| The pressure plate size（mm） | φ160mm |
| Bend the fulcrum maximum distance between two points（mm） | 300 |
| Bending roll width（mm） | 140 |
| The clamping way | Hydraulic clamping |
| The host dimension（mm） | 760*620*2200 |
| The oil source console size（mm） | 1100*750*1000 |
| Motor total power（kW） | 2 |
| 重量（公斤） | 2100 |
