- 描述
- 询问
描述
STM-2T Stormer粘度计
中号特点:
1.操作界面简单明了, and the viscosity test can be done quickly and conveniently through the creation of test program and data analysis;
2.Viscosity measurement accuracy: automatic calibration by computer, 高精准度, small error;
3.The display rich content: in addition to KU, G, CP of the three commonly used parameters, and temperature measurements for the full-scale value percentage (graphics), viscosity curve, 范围溢出报警, 定时, clock date, ETC。;
4.Timing measurement: very practical. We measured the paint, 墨水, paint is a typical non Newtonian fluid, the viscosity and temperature on the outside (except the temperature rise, but also with the decrease of viscosity) measurement time length. The paint has ink and paint is shear thinning characteristics, the longer the time of measurement of viscosity the smaller, if the viscosity of samples of the same class are comparable, the measurement time must be the same;
5.USB interface,insert U disk to copy measurement data directly(optional)
6.Self built 30 sets of test procedures: can be compiled, can quickly call;
7.Access to 30 sets of measurement data and curves; stored in the viscometer, the data include sample name, 库, G, CP value, measurement date, ETC。;
8.The real-time display of the viscosity curve: on the screen at any time watch;
9.Can connect micro printer and computer: there are two interfaces, serial connection computer, parallel port connection printer;
10.The front level: the rotor is vertically placed in the sample, it is important to the accuracy of measurement data. Through the observation level in front of the three foot level, which can conveniently adjust the base level of the bubble will be adjusted to the middle position (the current domestic Stormer viscometer on the market are not level regulating device);
11.Rich optional accessories: 温度探头, viscometer thermostat, 恒温杯, 打印机, 标准粘度样品, ETC。;
STM-2T Stormer viscometer is widely used to determine the paint, 墨水, paint or other KU values to represent the viscosity of the industry, in line with international standards ASTM, D562 and GB9296 and other related standards.
STM-2T Stormer粘度计
Detailed 时间技术性的 磷参数:
模型 | STM-2T |
控制 / 显示模式 | 5 英寸彩色触摸屏 |
速度(转/分) | 200±0.1 |
测量范围 | 40.2KU – 141.0KU 32g – 1099g 27 – 5250CP |
测量精度 | ±3% |
measurement reproducibility | ±1.5% |
Measuring container | 1 pint |
定时 | Flexible setting according to sample situation |
温度测量 | 标准温度探头接口 (need to match temperature probe) |
Self built measurement procedure | Can save 30 套 (including sample, 测量时间, 日期) |
保存测量结果 | 30 数据集 (including KU, G, CP, 时间, 曲线, ETC。) can be saved |
viscograph | Real time display viscosity curve |
打印 | 数据, curves can be printed (need to choose printers) |
数据输出接口 | USB interface: insert U disk to copy data directly (选修的) RS232 interface: connectable computer |
Thermostatic unit | 选项 (including special viscometer thermostatic bath, 恒温杯) |
工作电源 | 110V / 60Hz or 220V / 50赫兹 |
外形尺寸 | 300 × 300 × 450(毫米) |