泰伯磨损试验机LR-A013
Taber abrasion tester is used to do the test of wear-resistant in surface, 皮革, 布, 画, 纸, flooring, 胶合板, glass and natural rubber,concrete and ceramics. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased. Remove the specimen after rotation to reach a centain number, and then observe the condition of the specimen or compare the weight with the previous materials.
- 描述
- 询问
描述
泰伯磨损试验机
用途
This machine is used to do the test of wear-resistant in surface, 皮革, 布, 画, 纸, flooring, 胶合板, glass and natural rubber,concrete and ceramics. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased. Remove the specimen after rotation to reach a centain number, and then observe the condition of the specimen or compare the weight with the previous materials.
测试标准:ASTM D4060/D4157/D1044, JIS K5400/K7024, CNS 8540, BS EN 660-2
泰伯磨损试验机
规格
Specimen dimension | φ110mm φ6mm |
Grinding wheel | φ2″(MAX .45mm)1/2″(瓦) |
Center space of wheel | 63.5毫米 |
Distance between wheel and test plate | 37~38mm |
转速 | 60转速 |
加载 | 250G,500G,750G,1000G |
定时器 | 液晶显示屏,0~999999 |
Distance between sample and dust collector | 3毫米 |
方面 | 53×32×31cm
|
重量 | 18公斤, Excluding dust collector |
力量 | 1∮,交流220V,50赫兹 |