OIN automatique d'appareil de contrôle de ventouses LR-G006 1520
- Description
- Enquête
Description
OIN automatique d'appareil de contrôle de ventouses LR-G006 1520
Single coating and coating used in the detection of the extension of the coatings on metal substrate and damage.
– motor drive the punch has a very high reproducibility
– no zero steel plate, automatic zero after test, no accumulated error
– position sensor with high precision, sag precision can reach 0.01 mm
– the attached standard 10 times with lamp magnifying glass, convenient observation and judgment test results
– the largest measured 1.25 mm thick plates
– affichage numérique, all functions are controlled by two buttons
pas
Insert plates instrument openings, besmear level up
The power of the medium using the clamping device clamp plate
Start the cup drawing instrument, and through a magnifying glass observation test plate surface
At a constant speed is 0.2 mm/s automatic ball on top
Observed the first crack, immediately stop cup drawing instrument
Digital display screen read cup drawing depth values
At least three times of a test plate test
OIN automatique d'appareil de contrôle de ventouses LR-G006 1520
Conforme à la norme
GB/T 9753-2007 color paints and varnishes – cup drawing test
OIN 1520-2006
OIN automatique d'appareil de contrôle de ventouses LR-G006 1520
paramètres techniques
input voltage | 220V CA 50 Hz |
circular punch | Diamètre 20 mm |
sag depth | Max depth15 mm |
The depth of the precision | Division value0.01 mm |
Dimension | 230×360×430 mm |
poids | 35 kg |