ايزو 22553-5-2019 الدهانات والورنيشات – الطلاءات المودعة بالكهرباء – جزء 5: تحديد بقايا الشاشة

مقدمة
ايزو (المنظمة الدولية للمقاييس) هو اتحاد عالمي لهيئات المعايير الوطنية (الهيئات الأعضاء في منظمة الأيزو). عادة ما يتم تطوير المعايير الدولية من خلال اللجان الفنية ISO. Each member group interested in a subject for which a technical committee has been established has the right to be represented on the Committee. منظمات دولية, governments and non-governmental organizations in contact with ISO are also involved in this work. تعمل ISO بشكل وثيق مع اللجنة الكهروتقنية الدولية (اللجنة الانتخابية المستقلة) في جميع المسائل المتعلقة بالتوحيد الكهربائي.

جزء 1 of the ISO/IEC Directive describes the procedures used to develop this document and for further maintenance. بخاصة, وينبغي إيلاء الاهتمام لمعايير الموافقة المختلفة المطلوبة لأنواع مختلفة من وثائق ISO. تمت صياغة هذه الوثيقة وفقًا لقواعد التحرير الخاصة بجزء توجيهات ISO/IEC 2 (راجع iso.org/directives).

يرجى ملاحظة أن بعض عناصر هذه الوثيقة قد تكون موضوع حقوق براءات الاختراع. ISO ليست مسؤولة عن تحديد أي أو كل براءات الاختراع هذه. Details of any patent rights identified during the development of the document will be found in the introduction and/or list of ISO Patent declarations received (راجع iso.org/patents).

ايزو 22553-5-2019 الدهانات والورنيشات – الطلاءات المودعة بالكهرباء – جزء 5: تحديد بقايا الشاشة

يتم تقديم أي أسماء تجارية مستخدمة في هذه الوثيقة كمعلومات لراحة المستخدم ولا تشكل مصادقة.

Voluntary interpretation, related standards and conformity assessment related ISO specific terminology and express the meaning of and the ISO in the technical barriers to trade (TBT) الالتزام بمبادئ منظمة التجارة العالمية (منظمة التجارة العالمية) information, please see the iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 35, الدهانات والورنيشات, اللجنة الفرعية SC 9, Common Test Methods for paints and varnishes.

قائمة بجميع الأجزاء الموجودة في ISO 22553 يمكن العثور على السلسلة على موقع ISO.

يجب إحالة أي تعليقات أو أسئلة حول هذه الوثيقة إلى هيئة المعايير الوطنية للمستخدم. A complete list of these institutions can be found at iso.org/members.html.

يقدم
Electrodeposited coating materials are exposed to different stability stresses, such as temperature difference, قلق, and different deposition conditions. All of these effects, together or alone, can lead to dispersion instability. Condensation and kicking out of electrodeposited coatings may occur. هذا, in turn, leads to precipitation in the tank and/or on the surface to be coated, as well as filter clogging and other similar factory-specific problems.

ايزو 22553-5-2019 الدهانات والورنيشات – الطلاءات المودعة بالكهرباء – جزء 5: تحديد بقايا الشاشة

Through this test method, the stability level of electrodeposited coatings can be comprehensively detected.

1 نطاق التطبيق
This document specifies a method for determining contaminant substances, such as contaminant substances from prior processes, undispersed paint particles and other foreign bodies in electrodeposited coatings.

It is suitable for electrodeposition coatings in the automotive industry and other general industrial applications, such as chiller, consumer goods, radiators, الفضاء الجوي, زراعة.

في التمرين, there may be different reasons for the increase in screen residue, such as metal particles or clots introduced with the object to be painted.

2 الوثائق المرجعية المعيارية
عندما يتم الإشارة إلى الوثائق التالية في النص, بعضها أو كلها تشكل متطلبات هذه الوثيقة. للمراجع المؤرخة, تنطبق النسخة المذكورة فقط. بالنسبة للاقتباسات غير المؤرخة, نسخة جديدة من الوثيقة المشار إليها (بما في ذلك أي مراجعات) ينطبق.

ايزو 4618, الدهانات والورنيشات – المصطلحات والتعاريف

ايزو 22553-1, الدهانات والورنيشات – electrodeposited coatings – جزء 1: مفردات

ايزو 23321, Paints and varnishes solventssoftening waters for industrial applications – المواصفات وطرق الاختبار

ايزو 22553-5-2019 الدهانات والورنيشات – الطلاءات المودعة بالكهرباء – جزء 5: تحديد بقايا الشاشة

3 المصطلحات والتعاريف
لأغراض هذه الوثيقة, المصطلحات والتعاريف الواردة في ISO 4618, ايزو 22553-1 ويطبق ما يلي.

3.1 Screening slag

Material reserved on a screen with a specified mesh number

قسم المعلومات القياسية فقط هو العام. لرؤية المحتوى كاملا, تحتاج إلى شراء المعيار من خلال القنوات الرسمية.

شارك هذا المنشور