ايزو 23559-2011 – دليل اختبار الأفلام البلاستيكية والأفلام البلاستيكية الحرارية
مقدمة
ايزو (المنظمة الدولية للمقاييس) هو اتحاد عالمي لهيئات المعايير الوطنية (الهيئات الأعضاء في منظمة الأيزو). عادة ما يتم تطوير المعايير الدولية من خلال اللجان الفنية ISO. Each member group interested in a subject for which a technical committee has been established has the right to be represented on the Committee. منظمات دولية, governments and non-governmental organizations in contact with ISO are also involved in this work. تعمل ISO بشكل وثيق مع اللجنة الكهروتقنية الدولية (اللجنة الانتخابية المستقلة) في جميع المسائل المتعلقة بالتوحيد الكهربائي.
تتم صياغة المعايير الدولية وفقًا للقواعد الواردة في الجزء 2 لتوجيهات ISO/IEC.
المهمة الرئيسية للجنة الفنية هي تطوير المعايير الدولية. وسيتم توزيع مشروع المعيار الدولي الذي اعتمدته اللجنة الفنية على الهيئات الأعضاء للتصويت عليه. يتطلب النشر كمعيار دولي الموافقة بتصويت على الأقل 75% of the member bodies.
يرجى ملاحظة أن بعض عناصر هذه الوثيقة قد تكون موضوع حقوق براءات الاختراع. ISO ليست مسؤولة عن تحديد أي أو كل براءات الاختراع هذه.
ايزو 23559 was developed by the Technical Committee ISO/TC 61, البلاستيك, اللجنة الفرعية SC 11, منتجات.
This second edition cancels and replaces the first edition (ايزو 23559:2007) with a minor revision of the first edition (ايزو 23559:2007) by introducing an additional specimen (for low strain) for the tensile impact test specified in Table 2.
ايزو 23559-2011 – دليل اختبار الأفلام البلاستيكية والأفلام البلاستيكية الحرارية
يقدم
The purpose of this international standard is to provide manufacturers and users with guidance for testing plastic film.
Although existing standards provide this guidance for many thin film products, these standards are very specific in terms of the materials covered and do not address many commercial films produced as mixtures or multilayer structures. في بعض الحالات, existing standards are limited to a single process technology for producing thin films.
It is also recognized that due to the numerous commercial processes used to produce thin films and the different processing parameters required for different materials, mixtures and/or structures, the general standardized concept of thin film sample preparation is not currently realistic. على الجانب الآخر, it is possible to standardize sample preparation for clearly defined materials and manufacturing processes, but this is not within the scope or intent of this document.
Safety Statement – Persons using this document should be familiar with normal laboratory practices (إذا كان قابلا للتطبيق). This document is not intended to address all security concerns, لو اي, المرتبطة باستخدامه. It is the user’s responsibility to establish appropriate safety and health practices and ensure compliance with any regulatory requirements.
1 نطاق التطبيق
This international standard identifies specific test procedures to help manufacturers and users select and characterize single – or multilayer thermoplastic films. It is intended to provide a guide for films that do not have existing standards or specifications.
Note Due to the range of materials used and the variety of processes that can be used to produce various thin film structures, sample preparation is not covered in this document.
If an international standard exists for a particular film product, the requirements of that standard shall take precedence over this document.
There are many national, regional, and industry standards that address application-specific requirements. As this international standard is intended to provide general guidance, it is not within the scope of addressing these issues.
The importance and suitability of the data should be determined by the user.
ايزو 23559-2011 – دليل اختبار الأفلام البلاستيكية والأفلام البلاستيكية الحرارية
2 الوثائق المرجعية المعيارية
الملفات المرجعية التالية مطلوبة لتطبيق هذه الوثيقة. للمراجع المؤرخة, تنطبق النسخة المذكورة فقط. بالنسبة للاقتباسات غير المؤرخة, نسخة جديدة من الوثيقة المشار إليها (بما في ذلك أي مراجعات) ينطبق.
ايزو 307, البلاستيك – polyamides – Determination of viscosity values
ايزو 527-3 البلاستيك – Determination of tensile properties – جزء 3: Test conditions for films and sheets
ايزو 1133-1, البلاستيك – Determination of melt mass flow (MFR) ويذوب تدفق الحجم (MVR) of thermoplastics – جزء 1: Standard method
ايزو 1183-1, البلاستيك – Determination of density of non-foam plastics – جزء 1: impregnation method, liquid pyronometer method and titration method
ايزو 23559-2011 – دليل اختبار الأفلام البلاستيكية والأفلام البلاستيكية الحرارية
ايزو 1183-2, البلاستيك – Determination of density of non-foam plastics – جزء 2: density gradient column method
ايزو 1183-3, البلاستيك – Determination of density of non-foam plastics – جزء 3: Gas bottle method
ايزو 2813, الدهانات والورنيشات – Determination of mirror gloss of 20°, 60° و85° أفلام طلاء غير معدنية
ايزو 4589-1, البلاستيك – Determination of combustion behaviour by oxygen index – جزء 1: Guidance
ايزو 4589-2, البلاستيك – Determination of combustion behaviour by oxygen index – جزء 2: ambient temperature test
ايزو 4592, البلاستيك – films and sheets – determination of length and width
ايزو 4593, البلاستيك – films and sheets – Determination of thickness by mechanical scanning
ايزو 6383-1, البلاستيك – films and flakes – Determination of tear resistance – جزء 1: trouser tear method
ايزو 6383-2, البلاستيك – films and sheets – Determination of tear resistance – جزء 2: Elmendorf method
ايزو 7765-1, plastic films and sheets – Determination of impact resistance by the free fall method – جزء 1: step method
ايزو 7765-2, plastic films and sheets – Determination of impact resistance by the free fall method – جزء 2: instrumental puncture test
ايزو 23559-2011 – دليل اختبار الأفلام البلاستيكية والأفلام البلاستيكية الحرارية
ايزو 8256, البلاستيك – Determination of tensile impact strength
ايزو 8295, البلاستيك – films and sheets – Determination of coefficient of friction
ايزو 8296, البلاستيك – films and sheets – determination of wetting tension
ايزو 9773, البلاستيك – Determination of the burning behaviour of thin flexible vertical specimens in contact with a small flame ignition source
ايزو 11357-2, البلاستيك – Differential scanning calorimetry (DSC) – جزء 2: Determination of glass transition temperature
ايزو 11357-3 البلاستيك – Differential scanning calorimetry (DSC) – جزء 3: Determination of melting and crystallization temperature and enthalpy
ايزو 11443, البلاستيك – Determination of the fluidity of plastics using capillary tubes and slit die rheometers
ايزو 11501, البلاستيك – films and sheets – Determination of dimensional changes in heating
ايزو 11502, البلاستيك – films and sheets – Determination of resistance to adhesion
ايزو 13468-1, البلاستيك – Determination of total light transmittance of transparent materials – جزء 1: single-beam instrument
ايزو 13468-2, البلاستيك – Determination of total light transmittance of transparent materials – جزء 2: Double beam apparatus
ايزو 14782, البلاستيك – Determination of fog in transparent materials
ايزو 23559-2011 – دليل اختبار الأفلام البلاستيكية والأفلام البلاستيكية الحرارية
ايزو 15105-1, البلاستيك – films and sheets – Determination of gas permeability – جزء 1: differential pressure method
ايزو 15105-2, البلاستيك – films and sheets – Determination of gas permeability – جزء 2: isobaric method
ايزو 15106-1 البلاستيك – Films and sheets – Determination of water vapour transmittance – جزء 1: sensor method for humidity detection
ايزو 15106-2 البلاستيك – Films and sheets – Determination of water vapour transmittance – جزء 2: infrared detection sensor method
ايزو 15106-3 البلاستيك – Films and sheets – Determination of water vapour transmittance – جزء 3: electrolytic detection sensor method
ايزو 15989, البلاستيك – films and sheets – Measurement of water contact Angle for corona treated films
اللجنة الانتخابية المستقلة 60093, Test method for volume and surface resistivity of solid electrical insulating materials
اللجنة الانتخابية المستقلة 60112, Verification of solid insulating materials and determination of comparative leakage marking index
اللجنة الانتخابية المستقلة 60243-1, Electrical strength of insulating materials – Test methods – جزء 1: power frequency test
اللجنة الانتخابية المستقلة 60250, recommended method for determining the dielectric constant and dielectric loss factor of electrical insulation materials at power, audio and radio frequencies, including meter wavelengths
أستم D882, Standard test method for Tensile properties of thin plastic sheets
ASTM D5458, Standard Test method for Peel Adhesion of Stretched packaging Film
ASTM D5459, Standard Test Method for Longitudinal Elastic Recovery and Permanent Deformation and Stress Retention of Stretched Packaging films
ASTM D5748, Standard Test method for Resistance to protruding puncture of stretched packaging film
ASTM F88, Standard Test method for Sealing Strength of Flexible barrier materials
ASTM F1921, Standard Test Method for Thermal sealing Strength (thermal viscosity) of thermoplastic polymers and Blends Containing Flexible web sealing surfaces
ايزو 23559-2011 – دليل اختبار الأفلام البلاستيكية والأفلام البلاستيكية الحرارية
3 المصطلحات والتعاريف
لأغراض هذه الوثيقة, تنطبق المصطلحات والتعاريف التالية.
3.1 Thin Film
Films of nominal thickness not greater than 0.25 مم
Article Note 1: Although not specifically defined in ISO 472, ال 0.25 mm limit is noted. ASTM D883 specifically defines thin films as ≤0.25 mm.
ملحوظة 2: Sheets with a nominal thickness greater than 0.25 mm may be too hard to use test methods more suitable for thinner structures.
قسم المعلومات القياسية فقط هو العام. لرؤية المحتوى كاملا, تحتاج إلى شراء المعيار من خلال القنوات الرسمية.