Rosler vibration wear testing machine is a kind of experimental equipment commonly used to test the wear resistance of materials or products. It quantitatively analyzes the wear resistance of the material by simulating the force of the material in the vibration environment. This article will introduce the use of vibration wear testing machine from the following aspects.

1. Equipment preparation

1. أولاً, it is necessary to confirm whether the power and air supply of the testing machine are properly connected, and whether the relevant instruments and equipment are calibrated.

2. Check whether the screws and fasteners on the test machine are loose, and adjust them if they are loose to ensure the stability and safety of the test machine.

3. Load the sample to be tested into the testing machine as required, and ensure that it is firmly fixed.

نظرة عامة على استخدام آلة اختبار تآكل الاهتزاز Rosler

2. Test operation

1. Open the power switch of the testing machine and start the control system.

2. Enter the control interface to set test parameters, including amplitude, تكرار, الوقت والمعلمات الأخرى, and set them according to different test requirements.

3. Click the Start button to start the test process.

4. أثناء الاختبار, the data indicators of the test machine can be observed, such as amplitude size, frequency change, إلخ., as well as the wear degree and morphological change of the sample.

5. بعد الانتهاء من الاختبار, turn off the power switch of the testing machine and exit the control system.

نظرة عامة على استخدام آلة اختبار تآكل الاهتزاز Rosler

Third, precautions

1. قبل الاختبار, it is necessary to fully understand and evaluate the sample, including its material structure, use environment and other information, in order to select the appropriate test parameters.

2. أثناء الاختبار, attention should be paid to the operation of the testing machine, and if abnormal conditions are encountered, the test should be stopped in time and eliminated.

3. بعد الاختبار, the testing machine and samples should be carefully cleaned, and the relevant records and data sorting should be done.

4. مجال التطبيق

Rosler vibration wear testing machine is widely used in a variety of materials and products wear performance test, including metal, بلاستيك, ممحاة, المنسوجات, جلد, الطلاءات, ceramics and so on. It has important application value in manufacturing, quality inspection departments, scientific research institutions and other fields.