ISO 1247-2-21st Aluminium Pigments for Paints – Část 2: Vacuum metallized aluminium pigments
předmluva
ISO (Mezinárodní organizace pro normalizaci) je globální aliance národních normalizačních orgánů (členy ISO). Vývoj mezinárodních norem se obvykle provádí prostřednictvím technických komisí ISO. Každá členská instituce, která se zajímá o předmět, pro který byla ustavena technická komise, má právo být v této komisi zastoupena. Do této práce jsou zapojeny také mezinárodní vládní a nevládní organizace, které jsou ve spojení s ISO. ISO úzce spolupracuje s Mezinárodní elektrotechnickou komisí (IEC) ve všech záležitostech elektrotechnické normalizace.
Postupy použité k vytvoření tohoto dokumentu a postupy používané pro další údržbu jsou popsány v části 1 směrnice ISO/IEC. Zejména, všimněte si různých schvalovacích norem vyžadovaných pro různé typy dokumentů ISO. Tento dokument byl vypracován v souladu s pravidly pro úpravy v Části 2 směrnice ISO/IEC (viz iso.org/directives).
Vezměte prosím na vědomí, že určitý obsah tohoto dokumentu může být předmětem patentových práv. ISO nenese odpovědnost za identifikaci některého nebo všech takových patentů. Podrobnosti o jakýchkoli patentových právech identifikovaných během přípravy dokumentu budou uvedeny v úvodu a/nebo seznamu patentových nároků obdržených ISO (viz iso.org/patents).
Jakékoli obchodní názvy použité v tomto dokumentu jsou informace poskytnuté pro pohodlí uživatele a nepředstavují podporu.
Voluntary, related standards and conformity assessment related ISO specific terminology and express the meaning of and the ISO in the technical barriers to trade (TBT) dodržovat principy světové obchodní organizace (WTO) information, please see the iso.org/iso/foreword.html.
This document has been prepared by the ISO/TC 256 Technical Committee on Pigments, Dyes and Fillers.
The first version of ISO 1247-2, together with ISO 1247-1, cancelled and replaced the technically revised ISO 1247-1974. It also incorporates the amendment to ISO 1247-1974 /Amd 1:1982.
ISO 1247-2-21st Aluminium Pigments for Paints – Část 2: Vacuum metallized aluminium pigments
The main changes from the previous edition are as follows:
– The title has changed;
– Adds mandatory Article 3, terms and definitions, and includes the definition of vacuum metallized aluminium pigments (VMP);
— The original clause 3 “Popis” has been deleted and the contents are listed in the new Terms and Definitions Clause (3.1);
— Deletion of the original Article 4 “Classification”;
— The requirements and test methods of “leaf power supply” have been deleted;
– Article 5, now article 4, has been renamed “Requirements and test methods”;
— The original article 6 “Obal” is deleted;
— The original article 7 “vzorkování” has been reduced to a reference to ISO 15528 and has been renumbered as Article 5;
— The normative references have been updated, and the texts have been edited and revised.
A list of all the parts in the ISO 1247 sérii lze nalézt na webových stránkách ISO.
Any feedback or questions about this document should be directed to the user’s national standards body. A full list of these institutions can be found at https://www.iso.org/members.html.
1 rozsah
This document specifies the requirements and corresponding test methods for vacuum aluminized pigments (VMPS) applicable to the paint and printing ink industries.
2 Normativní odkazy
Na následující soubory se v textu odkazuje takovým způsobem, že část nebo veškerý obsah tvoří požadavky tohoto dokumentu. Pro datované odkazy, platí pouze citační verze. Pro nedatované reference, novou verzi reference (včetně případných revizí) platí.
ISO 1247-1:221, Aluminium pigments for paints – Část 1: Aluminium pigments in general
ISO 13320, particle size analysis – laser diffraction method
ISO 15528, Barvy, laky a suroviny pro barvy a laky — Vzorkování
ISO 18451-1, pigmenty, dyes and fillers — terminology — Část 1: General terminology
ISO 18451-2, pigmenty, dyes and fillers — terminology — Část 2: Classification of coloring materials according to their colour and chemical aspects
ISO 1247-2-21st Aluminium Pigments for Paints – Část 2: Vacuum metallized aluminium pigments
3 Termíny a definice
Pro účely tohoto dokumentu, termíny a definice uvedené v ISO 18451-1, ISO 18451-2 a platí následující články.
3.1 Vacuum metallized aluminum pigment VMP
Pigments produced in the vacuum metallization process and subsequent dimensions of vacuum aluminum foil plating
Poznámka 1 Vacuum metallization process is also known as physical vapor deposition (PVD) process.
Poznámka 2: The pigment has non-floating characteristics and the surface can be left untreated or transformed into floating characteristics by technical processing.
Veřejná je pouze standardní informační sekce. Chcete-li zobrazit celý obsah, musíte si standard zakoupit prostřednictvím oficiálních kanálů.