SPA-2600 Atmospheric Plasma Cleaning Machine
- Popis
- Poptávka
Popis
SPA-2600 Atmospheric Plasma Cleaning Machine
- The Profile:
SPA – 2600 Atmosphere Plasma cleaning machine (Plazmový čistič), is a in the atmospheric environment cleaning, activation, etching the surface of the product, usually served with a jet spray gun head of spray gun, the main processing, processing small area tracking accuracy is high, the bottom part of material, is paste in various industries, svařování, tisk, point glue easily off such problems as “Nemesis”.Plasma cleaning as a product surface printing, obal, fitting, povlak, svařování, viscose, coating process, is an important part of product upgrading, capacity expansion, cost reduction.
SPA-2600 Atmospheric Plasma Cleaning Machine
1.1 Vlastnosti produktu:
1.Compact machine, wide application range, professional, efficient, přesný, lasting, ochrana životního prostředí, and flexible configuration, nákladově efektivní
2.Can be combined with the production line, can be continuous operation, improve the production speed
3.Low gas cost（CDA/N2）,cost saving
4.Advanced in the industry Full-bridge inverter circuit;
5.Patented high voltage generator design;
6.Patented gun head design,No ESD generated
7.Unique patent discharge technology, high plasma concentration.
SPA-2600 Atmospheric Plasma Cleaning Machine
1.2 jándustrial Application:
1.3.C industry: phone assembly bonding, camera module, earphone bonding, mid frame bonding
2.Zobrazovací průmysl: TP state
3.Automotive industry bonding: headlights, steering wheel, EPDM seal, windshield, automotive electronics
4.Connector industry: cable character printing
5.Clock industry: bonding, inlaying, bonding
6.Plastikářský průmysl: surface activation, bonding, screen printing
7.Kovový průmysl: gold plating, silver plating, svařování, removal of residual organic matter
8.Glass industry: coating film, inkoustový tisk, povlak, vložit
SPA-2600 Atmospheric Plasma Cleaning Machine
2.1 Equipment Sspecifikace:
| Plasma power main machine specification | |
| Velikost pouzdra | 560*452*186mm（L*W*H） |
| hmotnost | 20KG |
| Input Power | 220PROTI，50/60Hz，3 line，50A |
| mains frequency | 20-50KHz |
| Plasma output | 300-500W nastavitelné；Choosable 200-300W (ultra-low power version, with muffler head, temperature 40-60℃) |
| control mode | I/O port |
| alarm | Overload protection, short circuit protection, circuit break protection, temperature protection |
| Plasma power gun head specification
| |
| Velikost hlavy kopí | As shown in the following equipment drawing |
| Gun nozzle specifications | 1.Optional normal jet direct injection 2mm, 3mm, 5mm, 10mm standard with nozzle 2. 2.Flat nozzle jet direct injection 10mm, 15mm |
| Spear head weight | 3KG |
| Plasma cleaning height
| 5-20mm |
| Effective plasma treatment width | 2-15mm |
| High tension line long | 3.5 m（ 6 m We can customize the） |
2.2.Tovární specifikace:
| Tovární specifikace
| |
| Ac power specification | zdroj napájení ：AC 220V，50/60Hz，3 line，50A |
| Factory exhaust
| Flow quantity :2.0 m³/min tlak：-280~-350 Pa texture：Corrosion resistant material
|
| Factory compressed air requirements
| tok：25Lpm tlak：3~7 kg/cm² pipe diameter:8×5mm texture：PU pipe dew point temperature：-40℃below Particle＞0.3μm：10Pcs/ft³ |
2.3.General Requirements:
| General Requirements | ||||||
| Device rotation rate | continuous operation 95% above | |||||
| Identifikace rizika | Identifikace nebezpečí vysokého tlaku | |||||
| service environment | teplota：15~30 ℃ Vlhkost vzduchu ：30~80% | |||||
| Else matters need attention | Nehořlavé plyny, korozivní plyny, výbuchy nebo reaktivní prach | |||||
| Consumable materials list
| ||||||
| Project | Sériové číslo | Množství | Service life | Poznámka | ||
| Poznámka | DYT002 | 1 | 5000 hour | |||
| Tryska | DYT013 | 1 | 5000 hour | |||
Poznámka:
- Do not change consumables without training.
- Please turn off the power for more than 20 minutes before replacing consumables, and make high voltage prot
