Vorwort
ISO (Internationale Standardisierungsorganisation) ist der globale Verband nationaler Normungsgremien (ISO-Mitgliedsorganisationen). Die Entwicklung internationaler Standards erfolgt in der Regel durch technische Komitees der ISO. Jede Mitgliedsgruppe, die sich für ein Thema interessiert, zu dem ein Fachausschuss eingerichtet wurde, hat das Recht, im Ausschuss vertreten zu sein. International, An dieser Arbeit sind auch staatliche und nichtstaatliche Organisationen in Zusammenarbeit mit der ISO beteiligt. ISO arbeitet eng mit der International Electrotechnical Commission zusammen (IEC) in allen Fragen der elektrischen Normung.

Teil 1 of the ISO/IEC Directive describes the procedures used to develop this document and for further maintenance. Insbesondere, Beachten Sie die unterschiedlichen Genehmigungsstandards, die für verschiedene Arten von ISO-Dokumenten erforderlich sind. This document has been drafted in accordance with the editorial rules in Part 2 der ISO/IEC-Richtlinie (siehe iso.org/directives).

Please note that some elements of this document may be the subject of patent rights. ISO ist nicht dafür verantwortlich, einige oder alle dieser Patente zu identifizieren. Details of any patent rights identified during the documentation development process will be included in the introduction and/or list of ISO patent claims received (siehe iso.org/patents).

Any trade names used in this document are information provided for the convenience of the user and do not constitute an endorsement.

Voluntary interpretation, related standards and conformity assessment related ISO specific terminology and express the meaning of and the ISO in the technical barriers to trade (TBT) adhere to the principle of the world trade organization (WTO) Information, please see the iso.org/iso/foreword.html.

This document has been prepared by Technical Committee ISO/TC 107, Metal and Other Inorganic Coatings, Unterausschuss SC 4, Hot-dip Coatings (Galvanizing, usw.).

ISO 14713-2-2019 Guidance and recommendations on corrosion protection of iron and steel in zinc coated structures – Teil 2: Hot dip galvanizing

The second edition cancels and replaces the first edition (ISO 14713-2:2009), which has been technically revised. The main changes compared with the previous edition are as follows:

— Minor technical changes were made and two new comments were added in Table 1;

– Improved clarity of the recommendations in article 6;

— Substantial revisions to the figures in Appendix A;

— Tables A.1, A.2 and A.3 are added to Appendix A.

Eine Liste aller Teile in der ISO 14713 Serien finden Sie auf der ISO-Website.

Any feedback or questions on this document should be referred to the user’s national standards body. A complete list of these institutions can be found at iso.org/members.html.

ISO 14713-2-2019 Guidance and recommendations on corrosion protection of iron and steel in zinc coated structures – Teil 2: Hot dip galvanizing

einführen
The protection of hot-dip galvanizing coating depends on the method of coating application, the design of the product and the specific environment to which the product is exposed. Hot-dip galvanized articles may be further protected by application of additional coatings (outside the scope of this document), such as organic coatings (paints or powder coatings). When applied to hot-dip galvanized products, this coating combination is often referred to as a “two-phase system”.

Specific product-related requirements that may exist for specific standards (Zum Beispiel, hot-dip galvanized coating on pipes or fasteners) take precedence over these general recommendations.

1 Geltungsbereich
This document gives guidance and recommendations on general design principles applicable to hot-dip galvanized articles after manufacture (z.B., according to ISO 1461) in case of corrosion, z.B., Articles manufactured according to EN 1090- 2.

This document does not apply to hot-dip galvanized coatings applied to continuous wire or sheet (z.B. IN 10346).

2 Normative Referenzdateien
When the following documents are referenced in the context, part or all of them constitute the requirements of this document. Für datierte Referenzen, Es gelten Nur-Zitat-Versionen. Für undatierte Zitate, the most recent version of the referenced document (including any amendments) gilt.

ISO 8044, Korrosion von Metallen und Legierungen – Basic terms and definitions

3 Begriffe und Definitionen
Für die Zwecke dieses Dokuments, die in der ISO angegebenen Begriffe und Definitionen 8044 und unten gelten.

ISO und IEC unterhalten unter den folgenden Adressen Datenbanken mit Begriffen für die Normung:

– ISO-Online-Browsing-Plattform: iso.org/obp

— IEC-Elektropädie: verfügbar unter electropedia.org/

3.1 Hot Dip Galvanizing

A zinc and/or zinc-iron alloy coating is formed on steel products by dipping prepared steel or cast iron into a zinc melt

3.2 Hot dip galvanized coating

Coatings obtained by hot-dip galvanizing (3.1)

Notiz 1 Der Begriff “hot dip galvanizing coating” is hereinafter referred to as “Beschichtung”.

3.3 Duplex System

Hot-dip galvanized coating (3.2) with additional paint or powder coating

Nur der Standardinformationsbereich ist öffentlich. Um den vollständigen Inhalt zu sehen, Sie müssen den Standard über die offiziellen Kanäle erwerben.