Vorwort
ISO (Internationale Standardisierungsorganisation) ist der globale Verband nationaler Normungsgremien (ISO-Mitgliedsorganisationen). Die Entwicklung internationaler Standards erfolgt in der Regel durch technische Komitees der ISO. Jede Mitgliedsgruppe, die sich für ein Thema interessiert, zu dem ein Fachausschuss eingerichtet wurde, hat das Recht, im Ausschuss vertreten zu sein. International, An dieser Arbeit sind auch staatliche und nichtstaatliche Organisationen in Zusammenarbeit mit der ISO beteiligt. ISO arbeitet eng mit der International Electrotechnical Commission zusammen (IEC) in allen Fragen der elektrischen Normung.

Teil 1 of the ISO/IEC Directive describes the procedures used to develop this document and for further maintenance. Insbesondere, Beachten Sie die unterschiedlichen Genehmigungsstandards, die für verschiedene Arten von ISO-Dokumenten erforderlich sind. This document has been drafted in accordance with the editorial rules in Part 2 der ISO/IEC-Richtlinie (siehe iso.org/directives).

Please note that some elements of this document may be the subject of patent rights. ISO ist nicht dafür verantwortlich, einige oder alle dieser Patente zu identifizieren. Details of any patent rights identified during the documentation development process will be included in the introduction and/or list of ISO patent claims received (siehe iso.org/patents).

Any trade names used in this document are information provided for the convenience of the user and do not constitute an endorsement.

For an explanation of ISO specific terms and expressions related to conformity assessment, as well as information on ISO compliance with WTO principles in Technical Barriers to Trade (TBT), see the following URL: Foreword – Supplementary Information

The committee responsible for this document is ISO/TC 256, Pigmente, Dyes and increments.

ISO 18473 consists of the following parts under the general heading Functional pigments and increments for special applications:

— Teil 1: Nanometer calcium carbonate for sealant applications

— Teil 2: Nanoscale titanium dioxide for sunscreen applications

ISO 18473-1-2015 Funktionelle Pigmente und Füllstoffe für spezielle Zwecke – Teil 1: Calciumcarbonat in Nanogröße für Dichtungsanwendungen

einführen
Sealants are widely used to prevent air, gas or liquid infiltration into many industries, einschließlich Bau, automobiles and electronics. Increments are an important component of sealant formulations that reduce cost and improve rheological and mechanical properties. The content of increment agent varies widely and can be as high as 50% (mass fraction). A common additive in sealants is calcium carbonate (CaCO 3) because it is readily available in a variety of sizes and can be used as a rheological modifier, enhancer, and sunblock. Commercial calcium carbonate can be divided into heavy calcium carbonate (GCC) and precipitated calcium carbonate (PCC), with three crystal structures of calcite, aragonite and spheroid aragonite. It exists in various forms, such as cubic, spherical, spindle, fibrous and acicular. Calcium carbonate with calcite crystal structure and cubic or spherical form is most widely used in sealant applications.

Nanoscale calcium carbonate (NCC) provides improved performance and additional features for a variety of sealants, including thixotropy, flame retardant, and improved durability and recyclability, and has become a major ingredient in sealant formulations. Nanoscale calcium carbonate in powder form is now easy to manufacture, mainly through the precipitation route to control size and form. The importance of surface treatment for the use of NCC in sealants cannot be overstated. Natural calcium carbonate 3 is hydrophilic. As a result, it tends to clump in organic polymers and plasticizers. NCCS, in particular, tend to aggregate more easily due to their small size and large surface area. NCCS are surface treated to give them hydrophobicity and improve their dispersion in hydrophobic systems. The surface treatment also improves the compatibility of the polymer matrix, thus improving the interface adhesion between the increment agent and the polymer.

It was found that the particle size, specific surface area, mass fraction, morphology, PH Wert, magnesium content, oil absorption value, water content and other characteristics of the supplied nano-sized calcium carbonate affected the performance of the sealant mixed with these materials. Nanoparticles. The characteristics of NCCS that need to be detailed in relation to sealant performance arise from the following facts. Erste, agreements between customers and suppliers do not always cover all material characteristics that affect sealant performance and/or machinability, or they are interpreted differently by customers and suppliers. Zweite, nanomaterials are relatively new. Material properties may depend on the technique used to measure them. So,

Dieser Teil von ISO 18473 lists the properties, measurements and characteristics of nanoscale calcium carbonate and is intended to aid its acceptance and application in sealants.

1 Geltungsbereich
Dieser Teil von ISO 18473 specifies the requirements and corresponding test methods for powdered nano-sized calcium carbonate for surface treatments used in sealant applications.

2 Normative Referenzdateien
All or part of the following documents are conventionally referenced in this document and are required for the application of this document. Für datierte Referenzen, Es gelten Nur-Zitat-Versionen. Für undatierte Zitate, a new version of the referenced document (including any amendments) gilt.

ISO 787-2, Allgemeine Prüfverfahren für Pigmente und Inkremente – Teil 2: Bestimmung flüchtiger Stoffe bei 105 °C

ISO 787-5, Allgemeine Prüfmethoden für Pigmente und Inkremente – Teil 5: Bestimmung von Ölabsorptionswerten

ISO 787-9, Allgemeine Prüfverfahren für Pigmente und Inkremente – Teil 9: Bestimmung des pH-Wertes wässriger Suspensionen

ISO 3262-1, coating increments — Spezifikation und Testmethoden — Teil 1: Einführung und allgemeine Testmethoden

ISO 3262-6, paint increments-specification and test methods-Part 6: Precipitated calcium carbonate

– ISO 9277, Bestimmung der spezifischen Oberfläche von Feststoffen durch Gasadsorption – BET-Methode

ISO 15528, Farben, Lacke und Rohstoffe für Farben und Lacke – Probenahme

ISO 18473-1-2015 Funktionelle Pigmente und Füllstoffe für spezielle Zwecke – Teil 1: Calciumcarbonat in Nanogröße für Dichtungsanwendungen

3 Begriffe und Definitionen
Für die Zwecke dieses Teils der ISO 18473, Es gelten die folgenden Begriffe und Definitionen.

3.1 Nanoscale

Sizes range from approximately 1 nm zu 100 nm

Eintragshinweis 1: Attributes that are not extrapolated from a larger size are usually (but not limited to) displayed within this size range. For such attributes, the size limit is considered to be approximate.

Eintragshinweis 2: The lower limit in this definition (approximately 1 nm) was introduced to avoid the designation of individual and small atomic groups as nanoobjects or nanostructured elements, which may imply that there is no lower limit.

3.2 Precipitate calcium carbonate

A synthetic calcium carbonate composed of triangular crystals (z.B., calcite) or diamond-shaped biconical crystals (z.B., aragonite)

Nur der Standardinformationsbereich ist öffentlich. Um den vollständigen Inhalt zu sehen, you will need to purchase the standard through the official channels.