Vorwort
ISO (Internationale Standardisierungsorganisation) ist eine globale Allianz nationaler Normungsgremien (ISO-Mitgliedsorganisationen). Die Entwicklung internationaler Standards erfolgt in der Regel durch technische Komitees der ISO. Jede Mitgliedsinstitution, die an einem Thema interessiert ist, zu dem ein Fachausschuss eingerichtet wurde, hat das Recht, in diesem Ausschuss vertreten zu sein. An dieser Arbeit sind auch internationale Regierungs- und Nichtregierungsorganisationen beteiligt, die mit der ISO zusammenarbeiten. ISO arbeitet eng mit der International Electrotechnical Commission zusammen (IEC) in allen Fragen der elektrotechnischen Normung.

Die Verfahren zur Erstellung dieses Dokuments und zur weiteren Wartung werden im Teil beschrieben 1 der ISO/IEC-Richtlinie. Insbesondere, Beachten Sie die unterschiedlichen Genehmigungsstandards, die für verschiedene Arten von ISO-Dokumenten erforderlich sind. Dieses Dokument wurde in Übereinstimmung mit den Bearbeitungsregeln in Teil erstellt 2 der ISO/IEC-Richtlinie (siehe iso.org/directives).

Bitte beachten Sie, dass bestimmte Inhalte dieses Dokuments möglicherweise Patentrechten unterliegen. ISO ist nicht dafür verantwortlich, einige oder alle dieser Patente zu identifizieren. Details of any patent rights identified during the preparation of the document will be in the introduction and/or list of patent claims received by ISO (siehe iso.org/patents).

Any trade names used in this document are information provided for the convenience of the user and do not constitute an endorsement.

Voluntary, related standards and conformity assessment related ISO specific and express the meaning of terminology as well as in relevant ISO technical barriers to trade (TBT) adhere to the principle of the world trade organization (WTO) Information, please refer to the iso.org/iso/foreword.html.

This document has been prepared by Technical Committee ISO/TC 6, Papier, Karton und Zellstoff, Unterausschuss SC 2, Test Methods and Quality Specifications for Paper and Board.

Any feedback or questions about this document should be directed to the user’s national standards body. A complete list of these institutions can be found at iso.org/members.html.

ISO TS 19857-2021 “Papier, Karton und Druckfarben – Labortestmethoden zum Einstellen der Druckfähigkeit von Offsetfarben”

einführen
This document describes a test method for evaluating the ink setting characteristics of a specific ink/substrate combination in offset lithography.

Offset is the transfer of ink from the front of one piece of paper to the back or front of the next.

Solidification is the process by which low viscosity liquid ink components penetrate into a permeable substrate. These low viscosity liquids in inks are mineral oils, vegetable oils, or esters of vegetable oils. By separating from these low viscosity liquids, the remaining ink film solidifies. This is combined with changes in surface viscosity, depending on the ink-varnish system and time. Surface viscosity usually increases at the beginning of the setup and drops to zero later. The setting is the main drying mechanism of an ink system (z.B. press inks) or part of a multi-channel drying mechanism (z.B. traditional sheeting offset inks or thermosetting inks). The laboratory test used for setting up the interlining of the new print onto the non-printing substrate at a specified time. The transfer of ink to a non-printing substrate depends not only on the degree to which the ink solidifies through solidification, but also on the actual viscosity level of the original ink film. daher, the test result is a combination measurement.

The absorptive properties of paper have great influence on offset lithography. Improper absorption can lead to many printing problems, such as ink offset, schlechte Haftung, mottling, unpredictable increase in tone value, poor friction resistance, and damage to the first printing surface on the perfect press after perfection.

The more absorbent the paper is, the less time it takes for the ink to set sufficiently for further processing, but rapid ink setting will adversely affect other properties. When testing the processing of wet sheets, very short periods of time should be used, for example in a perfect press. Longer times are used for paper processing after printing, while longer times are used for further processing, such as folding and cutting.

According to the test purpose, there are three options for paper and ink combination:

Producing reference ink on paper;

— production ink on reference paper;

– Production ink on paper, according to the application of printed matter, can be divided into the following types:

— face to face offset (z.B. after folding offset);

Offset in front (Zum Beispiel, in a stack of paper).

ISO TS 19857-2021 “Papier, Karton und Druckfarben – Labortestmethoden zum Einstellen der Druckfähigkeit von Offsetfarben”

1 Reichweite
This document describes a laboratory test method using an IGT1 or prufbau2 print-suitability tester for preparing samples to assess the absorption of ink on an offset substrate by setting a printed surface against an unprinted surface.

This method describes the use of ink volume to simulate monochromatic or multicolor printing. Printing and foil printing (counter printing) are done using intervals, between printing and counterprinting, that are common to the target process.

This method evaluates a specific ink and substrate combination.

2 Normative Verweisungen
Auf die folgenden Dateien wird im Text so verwiesen, dass der Inhalt teilweise oder vollständig den Anforderungen dieses Dokuments entspricht. Für datierte Referenzen, Es gelten Nur-Zitat-Versionen. Für undatierte Referenzen, die neueste Version der Referenz (einschließlich etwaiger Überarbeitungen) gilt.

ISO 5-4, Photographic and graphic techniques – Dichtemessung – Teil 4: Geometric conditions for reflection density

ISO 2834-1, Graphic techniques – Laboratory preparation of test prints – Teil 1: pasting inks

ISO 2846-1, Graphic technology – Colour and transparency of printing ink sets for four-colour printing – Teil 1: sheetrope and thermoset web offset lithography

3 Begriffe und Definitionen
Für die Zwecke dieses Dokuments, Es gelten die folgenden Begriffe und Definitionen.

ISO und IEC unterhalten unter den folgenden Adressen Datenbanken mit Begriffen für die Normung:

– ISO-Online-Browsing-Plattform: iso.org/obp

— Elektronische Enzyklopädie der IEC: verfügbar unter electropedia.org/

3.1 Ink Setting

The drying of ink by absorption and/or oxidation

3.2 Versatz

The effect that occurs when ink on a print is transferred from a printed surface to another surface

3.3 Foil paper

Reverse paper

Paper used to make counter prints for offset (3.2) assessment

3.4 Ink Film

< On the substrate. The amount of ink applied to the substrate surface to obtain the print optical density required for this test

Notiz 1: Quantities are specified in units of g/m2 or μm.

3.5 Ink Film

< On the printing mould. The amount of ink applied to the surface of the printing press to transfer to the substrate during the printing operation

Notiz 1: Quantities are specified in units of g/m2 or μm. The amount of ink film applied to the inking system is usually about twice the amount transferred to the substrate.

Nur der Standardinformationsbereich ist öffentlich. Um den vollständigen Inhalt zu sehen, Sie müssen den Standard über die offiziellen Kanäle erwerben.