Einführung
ISO (Internationale Standardisierungsorganisation) ist ein globaler Verband nationaler Normungsgremien (ISO-Mitgliedsorganisationen). Die Entwicklung internationaler Standards erfolgt in der Regel durch technische Komitees der ISO. Jede Mitgliedsgruppe, die sich für ein Thema interessiert, für das ein Fachausschuss eingerichtet wurde, hat das Recht, im Ausschuss vertreten zu sein. Internationale Organisationen, An dieser Arbeit sind auch Regierungen und Nichtregierungsorganisationen beteiligt, die mit der ISO in Kontakt stehen. ISO arbeitet eng mit der International Electrotechnical Commission zusammen (IEC) in allen Fragen der elektrischen Normung.

Teil 1 of the ISO/IEC Directive describes the procedures used to develop this document and for further maintenance. Insbesondere, Es sollte auf die unterschiedlichen Genehmigungskriterien geachtet werden, die für verschiedene Arten von ISO-Dokumenten erforderlich sind. This document has been drafted in accordance with the editorial rules of ISO/IEC Directive Part 2 (siehe iso.org/directives).

Bitte beachten Sie, dass einige Elemente dieses Dokuments Gegenstand von Patentrechten sein können. ISO ist nicht dafür verantwortlich, einige oder alle dieser Patente zu identifizieren. Details of any patent rights identified during the development of the document will be found in the introduction and/or list of ISO Patent declarations received (siehe iso.org/patents).

Any trade names used in this document are provided as information for the convenience of the user and do not constitute an endorsement.

ISO 22553-1- Farben und Lacke elektrolytisch abgeschiedene Beschichtungen – Teil 1: Wortschatz

Voluntary interpretation, related standards and conformity assessment related ISO specific terminology and express the meaning of and the ISO in the technical barriers to trade (TBT) adhere to the principle of the world trade organization (WTO) Information, please see the iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 35, Farben und Lacke, Unterausschuss SC 9, Gängige Prüfmethoden für Farben und Lacke.

Eine Liste aller Teile in der ISO 22553 Serien finden Sie auf der ISO-Website.

Any feedback or questions on this document should be referred to the user’s national standards body. A complete list of these institutions can be found at iso.org/members.html.

einführen
In the electrodeposition coating process, the non-volatile substances in the water-dilutive electrodeposition coating are deposited on the workpiece by the electrophoretic process. During this process, the internal and external areas of the workpiece, including all cavities, are touched. Cathode deposition or anode deposition is distinguished according to whether the workpiece is used as cathode or anode. The cathodic electrodeposition coating process is commonly used (Siehe Abbildung 1).

Figur 1 – Example of the deposition process during cathodic electrodeposition coating

ISO 22553-1- Farben und Lacke elektrolytisch abgeschiedene Beschichtungen – Teil 1: Wortschatz

Key

Through the combination of adhesives, pigments and deposition processes, hardening creates a very corrosion-resistant coating on the workpiece, which contributes significantly to corrosion protection in both internal and external areas.

The electrical properties of the material are also important for the electrical energy consumption (bulk charge density) of the process.

Since the electrophoretic paint is jointly responsible for the overall appearance of the coating system, it is often emphasized that the coating works well and has no visible defects.

daher, for extensive corrosion protection and sealing of the workpiece, additional joint sealing materials, adhesives or foams are recommended.

Inside the electrophoresis tank, bacterial contamination may be present due to the material being dragged in and the physical conditions (Hitze, water-based media, carbon sources, usw.).

This document specifies the terms and definitions of electrodeposited coatings. The subsequent part of the ISO 22553 series specifies methods of characterization and testing of electrodeposited coatings. An overview of the test methods is given in Annex A.

ISO 22553-1- Farben und Lacke elektrolytisch abgeschiedene Beschichtungen – Teil 1: Wortschatz

1 Geltungsbereich
This document defines the terms for electrodeposited coatings.

It is suitable for electrodeposition coatings in the automotive industry and other general industrial applications, such as chiller, consumer goods, radiators, Luft- und Raumfahrt, Landwirtschaft.

2 Normative Referenzdokumente
There are no normative references in this document.

3 Begriffe und Definitionen

3.1 Volume charge density ρ

Quotient of charge Q and volume V, as shown in the formula:

Farben und Lacke – electrodeposited coatings – Teil 1: Glossary Diagram 2

Notiz 1: The volume charge density is expressed in coulombs per cubic meter (C/m 3).

Article Note 2:1 C/m 3 = 1 A⋅s/m 3.

3.2 Deposition voltage u

The voltage is adjusted on the corresponding device to deposit an electrodeposited coating material (3.9) by an anode or cathode method, having a film thickness specified for the coating material

Notiz 1: The deposition voltage is measured in volts (V).

3.3 Deposition time

The time required to obtain the desired film thickness

3.4 Anode electrodeposition coating process

Anodic electrophoresis process

A variant of an electrodeposited coating in which the coated components are connected as an anode and the reverse electrode is connected as a cathode

3.5 Pigment content, determined by ashing

Mass fraction of residue after ashing of the product under specified conditions

Notiz 1: It includes inorganic pigments, Füllstoffe, and other solid components of the product that do not evaporate under test conditions, but their state may change.

3.6 Baking Process

The final drying and chemical crosslinking process of the applied paint film is initiated by heating

ISO 22553-1- Farben und Lacke elektrolytisch abgeschiedene Beschichtungen – Teil 1: Wortschatz

3.7 Backverlust

Volatiles released under standard baking conditions

Notiz 1: Baking loss includes reaction loss.

3.8 Entry Tags

Visible defects that occur during the immersion of the panel under voltage, usually in the form of streaks parallel to the bath surface on the object to be painted

Beispiel:

Hash marks (Siehe Abbildung 5), Nadellöcher (Siehe Abbildung 4), mappings (Siehe Abbildung 3).

3.9 Galvanische Beschichtungen

Electronic coating

Waterborne coatings for electrophoretic coating

3.10 Deposition time

The time that voltage is applied between anode and cathode during the coating process

3.11 Flores

Flower-shaped craters, formed by a combination of single craters

Eintragshinweis 1: Siehe Abbildung 2 for an example.

Figur 2 – Flores’ example

ISO 22553-1- Farben und Lacke elektrolytisch abgeschiedene Beschichtungen – Teil 1: Wortschatz

3.12 Kantenschutz

The ability to protect edges from corrosion

Article Note 1: Edges may be produced by drilling, punching, and cutting.

3.13 Edge corrosion

Corrosion due to inadequate edge protection (3.12)

Article Note 1: Edges may be produced by drilling, punching, and cutting.

3.14 Cathode electrodeposition coating process

Cathodic electrophoresis

A variant of an electrodeposited coating in which the coated parts are connected as a cathode and the reverse electrode is connected as an anode

ISO 22553-1- Farben und Lacke elektrolytisch abgeschiedene Beschichtungen – Teil 1: Wortschatz

3.15 Bacteria count

Colony count

The number of colony forming units (CFU) to form a macroscopically countable colony

3.16 Mapping

Local differences in film thickness in electrodeposited films

Eintragshinweis 1: Siehe Abbildung 3 for an example.

Figur 3 – Mapping example

ISO 22553-1- Farben und Lacke elektrolytisch abgeschiedene Beschichtungen – Teil 1: Wortschatz

3.17 Pinholes

The holes in the coating extend all the way to the substrate

Article Note 1: Pinholes are often mixed with craters.

Eintragshinweis 2: Siehe Abbildung 4 for an example.

Figur 4 – pinhole example

3.18 Hash tag

Hydrogen attached during the process causes characteristic depressions in the electrodeposited coating

Artikelhinweis 1: One characteristic of the pound sign is the direction of the horizontal line. Insbesondere, hash marks appear when the specimen is heavily impregnated.

Eintragshinweis 2: Siehe Abbildung 5 for an example. A distinct hash mark can be detected on the right side that has been moistened with softening water. On the left side of the department, there are significantly fewer hash marks.

ISO 22553-1- Farben und Lacke elektrolytisch abgeschiedene Beschichtungen – Teil 1: Wortschatz

3.19 Stabilität

Electrodeposited coatings are often exposed to the aging process, especially during extended downtime (holidays, downtime, usw.), wie zum Beispiel:

– evaporation of water, solvents and neutralizers;

– Chemical changes in adhesives caused by air;

— bring in bacteria;

– Other reactions of the adhesive

3.20 Effort

The ability of the electrodeposited coating to penetrate the box section

3.21 Workpieces

Objects coated with material

ISO 22553-1- Farben und Lacke elektrolytisch abgeschiedene Beschichtungen – Teil 1: Wortschatz

Beispiel:

Pipes, radiators, vehicles, steel test plates, magnesium and aluminum alloys, pre-treated plastics.

3.22 Rupture voltage

Electrodeposition coatings deposit a potential that is no longer controllable, Zum Beispiel, a significant change in film thickness, gas formation, or heat generation

Notiz 1: The rupture voltage can only be determined experimentally by the voltage series.

Nur der Standardinformationsbereich ist öffentlich. Um den vollständigen Inhalt zu sehen, Sie müssen den Standard über die offiziellen Kanäle erwerben.