ASTM D 1360-2011 Flame Retardancy of Coatings (Chamber Method)

Kahulugan at Layunin
This test method determines the relative flame retardant properties of the coating and the water leaching of the flame retardant material from the coating. Leaching simulates the effects of high humidity, weathering, and washing on the flame retardancy of coatings and is specified in various flame retardant coatings regulations and codes.

Saklaw ng
1.1 This test method quantitatively determines the flame retardant properties of wood surface coatings or coating systems and the leaching effect of water on the flame retardant properties of coatings or coating systems. Partikular na, the test method determines the weight loss and charring index of coated panels subject to flame and the effect of coating leaching on these parameters.

ASTM D 1360-2011 Flame Retardancy of Coatings (Chamber Method)

1.2 This test method shall only be used to measure and describe the reaction performance of materials, products or systems to heat and flame under controlled laboratory conditions and shall not be considered or used to describe, evaluate or regulate the fire hazard of materials, products or systems under actual fire conditions.

1.3 Values expressed in SI units shall be regarded as standards. Ang mga halaga na ibinigay sa mga panaklong ay para sa sanggunian lamang.

1.4 Ang pamantayang ito ay hindi nilayon upang matugunan ang lahat ng mga isyu sa kaligtasan, kung meron man, na nauugnay sa paggamit nito. Responsibilidad ng mga gumagamit ng pamantayang ito na magtatag ng angkop na mga kasanayan sa kaligtasan at kalusugan at upang matukoy ang pagiging angkop ng mga paghihigpit sa regulasyon bago gamitin.

Ibahagi ang post na ito