abstraction

This guide covers the selection and use of procedures for testing exterior wood stains. Kabilang dito ang tubig – and solvent-based translucent and opaque stains. The different conditions affecting the coating are introduced in detail. A balance of performance needs to be considered when determining requirements and selecting tests. Different test methods for determining the properties of liquid coatings are listed and discussed. Different methods for determining coating application and film formation are proposed and discussed in detail. Different test methods for determining the appearance of dry film are given. Different test methods for determining dry coating properties are described in detail. Different test methods and practices for chemical analysis of external wood are described in detail. While many suggested test methods attempt to simulate the coating and the conditions under which the coating is used, it is not possible to accurately replicate all possible conditions. It is recommended to use the test material under field conditions, including appropriate controls, for final assessment of its suitability.

This summary is a brief overview of the reference standards. It is for reference only and is not an official part of the standard; Reference is required to the full text of the standard itself for its use and application. ASTM makes no warranties of any kind, ipahayag o ipinahiwatig, at hindi kumakatawan na tumpak ang nilalaman ng abstrak na ito, complete or new.

ASTM D6763-16 Standard Guide for Testing Exterior Wood Stains and Water Repellents

Hakbang 1: Saklaw

1.1 This guide covers the selection and use of procedures for testing exterior wood stains and water repellents. This includes water-based and solvent-based translucent and opaque stains and clear water repellents. The attributes that can be checked or, in some cases, the relevant test procedures are listed in 2.1 at 2.2.

Tala 1: Ang terminong “opaque stain” is defined as a tinted composition applied to a wood surface to produce an even finish that obscures the grain and color of the wood rather than the surface grain; Also known as solid color or solid skin.

Tala 2: Ang terminong “translucency” is defined as a tinted composition used on a wood surface to produce an even finish that does not completely obscure the grain or grain of the wood.

Tala 3: Ang terminong “transparent” is defined as a transparent composition used on a wood surface to produce an even finish that does not obscure the grain or grain of the wood.

1.1.1 Discussion – When applied to wood of different colours, there is a colour difference between the stained substrates.

1.2 Values in inches to pounds shall be considered as standard values. Ang mga halaga na ibinigay sa mga panaklong ay mga transpormasyong matematikal ng mga yunit ng SI at para sa sanggunian lamang at hindi itinuturing na pamantayan.

1.3 This standard may address hazardous materials, operations and equipment. Ang pamantayang ito ay hindi nilayon upang matugunan ang lahat ng mga alalahanin sa kaligtasan, kung meron man, na nauugnay sa paggamit nito. Users of this standard are responsible for establishing appropriate safety and health practices and for determining the applicability of regulatory requirements prior to use.