ASTM D7971 Standard guidance for Measuring the roundness of glass Spheres using a Flow Digital Image Analyzer includes determining the roundness of glass spheres used in pavement marking systems using a flow digital Image analyzer.
Kahulugan at paggamit

4.1 The roundness of the glass beads has a significant effect on the reverse reflection efficiency of the pavement marking system.

4.2 This guide is used to characterize the roundness of glass beads for conformance testing to standard specifications for glass beads in pavement marking applications.

4.3 While the potential industrial applications of this guidance extend beyond measuring the roundness of glass beads for pavement markings, these applications are beyond the scope of this standard.

ASTM D7971-2015 Standard Guide for Measuring the Roundness of Glass Spheres Using a Flow Digital Image Analyzer

Hakbang 1: Saklaw

1.1 This guide covers the use of a flow flow digital analyzer to determine the roundness of glass spheres used in pavement marking systems. Typical grades for pavement marking systems are defined in the type 0 sa 5 range in AASHTO M247.

1.2 This Guide specifies the representation of roundness data in various formats to meet the requirements of the Agency pavement marking Material specification. For most specifications, the standard format is to display the roundness data as a percentage true sphere relative to a range of standard ASTM sizing sizes.

1.3 Ang mga pagpapahalagang ipinahayag sa mga yunit ng SI ay dapat ituring bilang mga pamantayang pagpapahalaga. Walang iba pang mga yunit ng pagsukat ang kasama sa pamantayang ito.

1.4 Ang pamantayang ito ay hindi nilayon upang matugunan ang lahat ng mga alalahanin sa kaligtasan, kung meron man, na nauugnay sa paggamit nito. Responsibilidad ng mga gumagamit ng pamantayang ito na magtatag ng angkop na mga kasanayan sa kaligtasan at kalusugan at upang matukoy ang pagiging angkop ng mga paghihigpit sa regulasyon bago gamitin.