Kahulugan at paggamit

5.1 This test method is designed to measure volatile organic compounds emitted by packaging materials under high temperature conditions.

5.2 This test method may assist in the development and manufacture of packaging materials with minimal retention of packaging ink/adhesive solvents.

5.3 This procedure can be modified by using an appropriate qualitative GC detection device (e.g. a mass spectrometer) instead of a flame ionization detector to identify unidentified VOCs.

ASTM F1884-2018 Standard Test Method para sa Pagpapasiya ng mga Residual Solvents sa Packaging Materials

Hakbang 1: Saklaw

1.1 This test method covers a method for determining the amount of residual solvent released within the packaging material in a sealed vial at a given time and temperature conditions and is a proposed alternative to test method F151.

1.2 This test method covers procedures for quantifying volatile compounds whose identities have been determined and retained in the packaging material.

1.3 The analyst shall determine the sensitivity and reproducibility of the method by conducting appropriate studies of the target solvent. Analysts may refer to Convention E260 for guidance.

1.4 For the purpose of verifying identity or identifying unknown volatile compounds, analysts are encouraged to use gas chromatography/mass spectrometry, gas chromatography/infrared spectroscopy or other appropriate techniques in conjunction with this test method.

ASTM F1884-2018 Standard Test Method para sa Pagpapasiya ng mga Residual Solvents sa Packaging Materials

1.5 Due to variations in substrate/solvent interactions between different sample types, the sensitivity of this test method in determining a given retention solvent concentration needs to be determined on a case-by-case basis.

1.6 This test method does not address the problem of determining the total residual solvent in the packaging material. For this, techniques such as multiple headspace extraction can be employed. You can refer to the manual that comes with the GC-Automatic sampling system for guidance to the analyst.

1.7 Values expressed in SI units shall be considered standard.

1.8 This standard is not intended to address all safety concerns associated with its use. Responsibilidad ng mga gumagamit ng pamantayang ito na magtatag ng angkop na kaligtasan, kalusugan at kapaligiran pagtutukoy at upang matukoy ang pagiging angkop ng mga paghihigpit sa regulasyon bago gamitin.

1.9 Ang internasyonal na pamantayang ito ay batay sa mga prinsipyo ng standardisasyon na kinikilala ng internasyonal na itinatag sa Desisyon sa mga Prinsipyo para sa Pag unlad ng mga Internasyonal na Pamantayan, Mga Patnubay at Rekomendasyon na inisyu ng WTO Technical Barriers sa Trade (TBT) Komite.

ASTM F1884-2018 Standard Test Method para sa Pagpapasiya ng mga Residual Solvents sa Packaging Materials

2. Sumangguni sa file

Pamantayan ng ASTM

E177 Practice of using the terms accuracy and deviation in ASTM test methods

E260 packed column gas chromatography practice

E691 Practice of conducting inter-laboratory studies to determine the accuracy of test methods

Test method for residual solvents in F151 flexible barrier materials