panimula
ISO (International Organization para sa Standardisasyon) ay isang pandaigdigang pederasyon ng mga pambansang pamantayan ng katawan (Mga katawan ng miyembro ng ISO). Ang pagbuo ng mga internasyonal na pamantayan ay karaniwang isinasagawa sa pamamagitan ng ISO teknikal na komite. Ang bawat grupo ng miyembro na interesado sa isang paksa kung saan ang isang teknikal na komite ay itinatag ay may karapatang kumatawan sa Komite. Mga internasyonal na organisasyon, ang mga pamahalaan at mga non government organization na nakikipag ugnayan sa ISO ay kasangkot din sa gawaing ito. ISO ay gumagana nang malapit sa International Electrotechnical Commission (IEC) sa lahat ng bagay ng electrical standardization.

Ang draft international standard na pinagtibay ng Technical Committee ay ipapakalat sa mga miyembro ng mga katawan para sa pagboto. Publication as an international standard requires approval by a vote of at least 75% of the member bodies.

The international standard ISO 8780-5 was developed by the ISO/TC 35 Technical Committee on Paints and Varnishes.

ISO 8780-5-1990 “Dispersion methods for assessing dispersion properties of pigments and fillers – Bahagi 5: Dispersion using an automatic grinder”

ISO 8780 consists of the following sections, under the general heading Pigments and increments – Dispersion methods for assessing dispersion properties:

– Bahagi 1: Panimula

– Bahagi 2: Dispersion using oscillators

– Bahagi 3: Dispersion of grinding using high-speed impellers

– Bahagi 4: Dispersion using a bead mill

– Bahagi 5: Dispersion using an automatic grinder

– Bahagi 6: Dispersion using a three-roll grinder

Appendix A forms an integral part of this part of ISO 8780.

ISO 8780-5-1990 “Dispersion methods for assessing dispersion properties of pigments and fillers – Bahagi 5: Dispersion using an automatic grinder”

1 Saklaw ng Aplikasyon
Ang bahaging ito ng ISO 8780 specifies a method for dispersing pigments and increments using an automatic grinder. It is suitable for comparison of small and medium-sized samples of pigment quality control. Ang bahaging ito ng ISO 8780 is used in conjunction with the evaluation methods described in ISO 8781, using an agreed upon system of high viscosity adhesives that do not contain volatile solvents. It should be read together with ISO 8780-1.

This method is limited to high viscosity abrasives. The results obtained cannot be compared with the dispersion results obtained using other dispersion methods.

2 Normatibong mga dokumento ng sanggunian
The following standards contain provisions which, by reference herein, constitute the provisions of this part of ISO 8780. At the time of publication, the version shown is valid. All standards are subject to revision and parties to agreements based on this part of ISO 8780 are encouraged to investigate the possibility of applying new versions of the following standards. IEC and ISO members maintain a register of currently valid international standards.

ISO 842:1984, Raw materials for paints and varnishes – Pag sampling.

ISO 8780-1:1990, pigments and increments – Dispersion methods for the assessment of dispersion properties – Bahagi 1: Panimula.

ISO 8781-1:1990, pigments and increments – Methods for assessing dispersion properties – Bahagi 1: Assessment against changes in tint strength of coloured pigments.

ISO 8781-2:1990, pigments and increments – Methods for assessing dispersion properties – Bahagi 2: Assessment against changes in grinding fineness.

ISO 8780-5-1990 “Dispersion methods for assessing dispersion properties of pigments and fillers – Bahagi 5: Dispersion using an automatic grinder”

ISO 8781-3:1990 Pigments and increments – Methods for assessing dispersion properties – Bahagi 3: Assessment from changes in gloss.

Ang standard information section lamang ang pampubliko. Upang makita ang buong nilalaman, kailangan mong bilhin ang pamantayan sa pamamagitan ng mga opisyal na channel.