Abstrait
This specification covers enhanced (Tapez I) et conventionnel (type II) paper adhesive tapes for securing and binding paper products and sealing fiberboard boxes. Type I adhesive tape can be stripped (class 1) or not stripped (class 2), while Type II paper adhesive tape, whether it is class A (light load), class B (medium load) or class C (lourde charge) can not be stripped. The tape should be made of kraft paper, but it is also recommended to use recycled pulp in the paper, and the adhesive used must not have an offensive odor, and should comply with the specified environmental precautions. Type I tape should consist of two rolls of paper, while Type II tape should consist of one roll of paper. When produced, tape should be clean and free of folds, sharp creases, tears, cuts and holes. The tape should be checked for appearance defects, roller structure defects and dimensional defects. Tests for adhesion, tensile strength and elongation should also be carried out and should conform to specified physical properties.

This summary is a brief summary of the reference standards. It is informational only and not a formal part of the standard; The full text of the standard itself needs to be used and applied for reference. ASTM provides no warranties, expresse ou implicite, et ne garantit pas que le contenu de ce résumé est exact, complete, or new.

Étape 1: Portée
1.1 This specification covers ordinary and reinforced paper adhesive tapes for fixing and binding paper products and for sealing fiberboard boxes.

1.2 This regulation is intended to replace the Federal Reserve. Glasses. Part of CID AA-1492, CID AA-1671 and PPP-T-45.

1.3 Les valeurs exprimées en unités SI doivent être considérées comme des valeurs standard. Les valeurs données entre parenthèses sont à titre indicatif uniquement.

1.4 The following safety hazard warnings apply only to Section 11 “Méthodes d'essai” of this specification: This standard is not intended to address all safety hazards associated with use. It is the responsibility of the user of this standard to establish appropriate safety and health measures prior to use and to determine the applicability of regulatory restrictions.

1.5 Cette norme internationale est basée sur les principes de normalisation internationalement reconnus établis dans la Décision sur les principes pour l'élaboration de normes internationales., Lignes directrices et recommandations émises par l'OMC Obstacles techniques au commerce (OTC) Comité.

Spécification standard ASTM D5749-2017 pour le ruban renforcé et ordinaire pour l'étanchéité et la fixation

2. Se référer au dossier
Norme ASTM

D685 Conditions for inspection of paper and paper products

D828 Test method for tensile properties of paper and paperboard using constant elongation equipment

D996 Packaging and distribution environmental terms

D1974 / D1974M Practice of methods for sealing, sealing and reinforcing fiberboard boxes

D3951 Commercial packaging specification