La machine d'essai d'usure TABER convient au tissu, papier, peinture, contre-plaqué, cuir, carrelage, verre, plastique naturel, etc.. La méthode de test est une paire de meules sur le matériau de test en rotation, et la charge spécifiée, le matériau d'essai tourne pour entraîner la meule, pour le matériel de test d'usure, le poids de perte d'usure est la différence de poids avant et après le test. Généralement utilisé pour tester les produits en cuir, l'éprouvette est mise en rotation sur une plate-forme horizontale, two grinding wheels are given a specific pressure on the test piece to rotate, the axis of the grinding wheel is parallel to the horizontal plane, one grinding wheel faces outwards, the other faces inwards, in a certain period of time, record all changes in the test specimen.

Ensure the stability and accuracy of the test: The general grinding head is the size and shape of the eraser head at the end of a pencil, and is made of high-quality wear materials. Can ensure the stability of the test. It can test samples of any size or shape. It is ideal for abrasion testing products with contoured and polished surface characteristics. It is used in plastics, automotive parts, caoutchouc, leather and textiles, galvanoplastie, freely removable components, des peintures, printed patterns and other products.

Ces petits détails d'utilisation des machines de test d'usure TABER ne peuvent être ignorés:

1. When installing the grinding WHEEL, the one with the RIGHT WHEEL is installed on the right side, the LEFT WHEEL is installed on the left side, and the labeled side faces outward. The grinding wheel should be replaced when it is worn to the periphery of the roll label.

2. Gently put the test rod arm and dust suction arm, do not directly impact the test surface, in order to extend the service life of the grinding wheel.

3. Weight on both sides should be the same to ensure the accuracy of the test value.

4. When the test disc is not equipped with specimens, do not put down the test rod arm, turn on the switch and let it idle, so as not to hurt the grinding wheel and parts.

5. Pendant le test, the vacuum cleaner must be turned on to avoid the ash attached to the grinding wheel.

6. Test rod arm and test disc mandrel should be lubricated with a little lubricating oil at any time.

When the set number of tests is reached, the power supply is automatically cut off.

After the machine is shut down, remove the sand dust from the leather surface with a small brush, and take off the test piece together with double-sided tape to weigh the precision balance to four decimal places, and record it, and the test value can be obtained according to the formula.