15אוקטובר
15אוקטובר
What is the working principle of xenon lamp aging test equipment?
What is the working principle of xenon lamp aging test equipment? Xenon lamp aging test equipment is used to simulate weather conditions such as sunlight exposure, rain and dew condensation, to test the durability of materials in light and wet environment.Xenon lamp aging test equipment provides a simulated accelerated test material aging light and wet environment, can control the light intensity to achieve accelerated test test effect, the light intensity and different wavelengths will affect the performance stability of the... 15אוקטובר
Notes on precision balance
Notes on precision balance As we all know, the precision balance is a kind of precision electronic instrument, which is widely used in laboratory and medical fields.This electronic balance uses a higher precision sensor and more control chip, so it has higher precision and sensitivity than ordinary electronic balance.Although the precision balance has many advantages, it is easy to be interfered by external factors, electromagnetic and other factors, which will produce certain errors. So how can we improve the accuracy... 15אוקטובר
Determination of paper air permeability
Fundamentals The pressure difference method is used to place the pre-processed sample between the upper and lower measuring surfaces, and a constant pressure difference is formed on both sides of the sample.Under the action of pressure difference, the gas flows from the high pressure side through the sample to the low pressure side, and the permeability of the sample is calculated according to the area, pressure difference and flow through the sample. Definition of breathability Average air flow through paper... 05יוני
Roughness gauges can be paired with several sensors
Roughness gauges can be paired with several sensors When we measure different workpieces, we will match different sensors for measurement.So how many sensors can roughness gauge be matched with?How many sensors are there?The following Xiaobian to answer Sensors are divided into: 1. Standard sensors Standard sensors use the most sensors, it can measure most of the plane, מישור משופע, conical surface, inner hole, groove and other surface roughness, can be carried out hand-held measurement, in addition to the standard sensor, other sensors need... 05יוני
מהם הגורמים המשפיעים על דיוק המדידה של מד עובי הציפוי
תיאור הגורמים המשפיעים על דיוק מדידת מד עובי הציפוי א) Magnetic properties of the base metal Thickness measurement by magnetic method is affected by the change of the magnetic properties of the base metal (in practical application, the change of the magnetic properties of the low carbon steel can be considered to be slight). In order to avoid the influence of heat treatment and cold working factors, the standard sheet with the same properties as the sample base metal should... 05יוני
הבן את העיקרון והיישום של מכשיר חספוס פני השטח
מכשיר חספוס נקרא גם מכשיר חספוס פני השטח, מכשיר לגימור משטח, גלאי חספוס פני השטח, מכשיר למדידת חספוס, מד חספוס, roughness tester and other names. It was first developed and produced abroad and then introduced into China. Roughness meter measuring the surface roughness of workpieces, put the sensors on the workpiece surface to be tested, by instrument internal drive mechanism drive the sensor do constant speed glide along the surface to be tested, sharp sensor through the built-in stylus feel the... 05יוני