TABER wear testing machine introduction:
This machine is used for wear resistance test of leather, בַּד, צֶבַע, עיתון, אריח רצפה, דִיקְט, זכוכית, natural rubber, וכו. The method is to cut the specimen with a standard cutter, wear it with a specified type of grinding wheel, load it with a certain weight, and take out the specimen after the specified number of revolutions, observe the condition of the specimen or compare the weight difference before and after the test. Mainly test the wear resistance of the material, wear resistance with two standard small grinding wheels, calculate the importance of the material and see if there is damage after grinding.
Mainly used in leather, עוֹר, בַּד, צֶבַע, עיתון, floor, דִיקְט, זכוכית, natural rubber suitcase, carpet, clothing, זכוכית, plastic coating, ceramic tile, metal coating, צֶבַע, varnish, decorative sheet, high pressure sheet, פלסטי, טֶקסטִיל, elastic floor mat, traffic paint, anodized layer, blankets, electronic components, decorative board, wax, labels, leather cases, חומרים דנטליים, Automotive interior decoration, resin, furniture and research laboratories; Commodity inspection arbitration, technical supervision departments, וכו. to detect the performance of leather products.

TABER wear testing machine calibration steps:
שלב 1, set the rated revolution of the counter to 60r/min:
שלב 2, press the RST key to clear the counter;
Step 3,Press the start button and start the stopwatch at the same time.
שלב 4, the counter records to 60 סל"ד. The testing machine automatically stops, stops the stopwatch time;
שלב 5, Record stopwatch time:
Repeat steps 2 ל 5 מֵעַל, both times should be within the range of 60s±2s.