ISO 1514-2016 “צבעים ולכות – מדגם סטנדרטי לבדיקה”

הקדמה
ISO (הארגון הבינלאומי לתקינה) היא ברית גלובלית של גופי תקינה לאומיים (גופים חברי ISO). פיתוח תקנים בינלאומיים מתבצע בדרך כלל באמצעות ועדות טכניות של ISO. כל מוסד חבר המעוניין בנושא בו הוקמה ועדה טכנית זכאי להיות מיוצג בוועדה. ארגונים בינלאומיים ממשלתיים ובלתי-ממשלתיים העוסקים בקשר עם ארגוני תקינה מעורבים אף הם בעבודה זו. ISO עובד בשיתוף פעולה הדוק עם הנציבות האלקטרוטכנית הבינלאומית (חברת החשמל) בכל הקשור לתקינה חשמלית.

ההליכים המשמשים לפיתוח מסמך זה וכן אלה המשמשים לתחזוקה נוספת מתוארים בחלק 1 של הוראת ISO/IEC. באופן מיוחד, יש לשים לב לקריטריוני האישור השונים הנדרשים עבור סוגים שונים של מסמכי ISO. מסמך זה נוסח בהתאם לכללי העריכה של חלק 2 של הוראת ISO/IEC (ראה iso.org/directives).

ISO 1514-2016 “צבעים ולכות – מדגם סטנדרטי לבדיקה”

אנא שימו לב כי תוכן מסוים של מסמך זה עשוי להיות כפוף לזכויות פטנט. ISO אינה אחראית לזיהוי כל זכויות פטנט כאלה או כולן. פרטים על כל זכויות פטנט שזוהו במהלך הכנת המסמך יהיו במבוא ו/או ברשימת תביעות הפטנט שיתקבלו על ידי ISO (ראה iso.org/patents).

כל שמות מסחריים המשמשים במסמך זה מסופקים כמידע לנוחות המשתמש ואינם מהווים אישור.

להערכת התאמה למינוחים ספציפיים הקשורים ל-ISO ולהביע את משמעות המפרט, as well as the relevant ISO in technical barriers to trade (TBT) adhere to the principle of the world trade organization (WTO) in the information, please refer to the following URL:iso.org/iso/foreword.html.

הוועדה האחראית למסמך זה היא ISO/TC 35, צבעים ולכות, ועדת המשנה SC 9, שיטות בדיקה כלליות לצבעים ולכות.

Fifth edition to cancel and replace the fourth edition (ISO 1514:2004), which is revised on technology, made the following changes:

א) the method of preparation of the zinc phosphate and chromate treatment, chromate conversion coating and acid chromium, remove;

ב) to modify the following materials: coil coating board, plastic board, glass fiber reinforced plastic composite board, carbon fiber reinforced plastics (GRP) composite panels (CFP);

ISO 1514-2016 “צבעים ולכות – מדגם סטנדרטי לבדיקה”

ג) The original annex B on the characteristics of zinc and zinc alloy coatings has been deleted;

ד) A new annex B is added to the universal substrate surface board;

ה) Normative references have been updated.

מבוא
For many of the most widely used test methods for paints and varnish, the type of panel used and the particular way in which it is prepared for use can greatly affect the test results. As carefully as possible before painting, therefore, standardization of panels and used for preparation procedure is very important.

It is not possible to include in international standards all the types of panels and preparations required for paint testing

This international standard describes preparation procedures that are known to be reproducible and provides additional guidance in cases where there may still be doubt due to a lack of international uniformity of procedures.

ISO 1514-2016 “צבעים ולכות – מדגם סטנדרטי לבדיקה”

1 תְחוּם
This international standard specifies several types of standard panels and describes procedures for preparing them before painting. These standard panels are used for general test methods for paints, varnishes and related products (see Annex B).

2 אזכור נורמטיבי
The following documents are referred to normatively in whole or in part in this document and are required for their application. להפניות מתוארכות, רק הגרסה המצוטטת חלה. להפניות ללא תאריך, the references of the new version (including any amendment) חל.

ISO 1268 (כל הרכיבים), fiber-reinforced plasticsMethod for producing test plates

ISO 2409, צבעים ולכות — Cross cut test

ISO 2808, צבעים ולכות — קביעת עובי הסרט

ISO 1514-2016 “צבעים ולכות – מדגם סטנדרטי לבדיקה”

ISO 4287, geometrical product specifications (GPS) – surface texture: profile method, terms, definitions, and surface texture parameters

ISO 8336, fibre cement plates-product specifications and test methods

ISO 11949, cold reduction electrolytic tin plate

IN 520, Gypsum plasterboard – הגדרות, requirements and test methods

IN 622 (כל הרכיבים), fiberboard — מִפרָט

IN 1396, Aluminium and aluminium alloyscoiled-sheet and strip for general applications – מִפרָט

IN 10205, cold reduction blackboards in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steels

ISO 1514-2016 “צבעים ולכות – מדגם סטנדרטי לבדיקה”

IN 13523-1, the coil coating metaltest methods – חֵלֶק 1: thin film thickness

IN 13523-22, coil coated metalsTest methods – חֵלֶק 22: Chromatic aberrationVisual comparison

IN 15283-2, fiber-reinforced plasterboarddefinitions, requirements and test methods – חֵלֶק 2: gypsum fiberboard

IN 16245-1, fiber-reinforced plastic compositesStatements on properties of raw materials – חֵלֶק 1: דרישות כלליות

רק רכיב המידע הסטנדרטי זמין לציבור. לצפייה בתוכן המלא, תצטרך לרכוש את התקנים דרך ערוצים רשמיים.

שתף את הפוסט