ISO 23559-2011 מדריך לבדיקת סרטי פלסטיק ויריעות תרמופלסטיות
הַקדָמָה
ISO (הארגון הבינלאומי לתקינה) היא הפדרציה העולמית של גופי התקנים הלאומיים (גופים חברי ISO). פיתוח תקנים בינלאומיים מתבצע בדרך כלל באמצעות ועדות טכניות של ISO. Each member group interested in a subject on which a technical committee has been established has the right to be represented on the Committee. International, governmental and non-governmental organizations in liaison with ISO are also involved in this work. ISO עובד בשיתוף פעולה הדוק עם הנציבות האלקטרוטכנית הבינלאומית (חברת החשמל) בכל הקשור לתקינה חשמלית.
תקנים בינלאומיים מנוסחים בהתאם לכללים המפורטים בחלק 2 של הוראת ISO/IEC.
המשימה העיקרית של הוועדה הטכנית היא לקבוע סטנדרטים בינלאומיים. טיוטת הסטנדרטים הבינלאומיים שאומצו על ידי הוועדה הטכנית יופצו לגופים החברים להצבעה. Publication as an international standard requires approval by a vote of at least 75% of the member body.
Please note that some elements of this document may be the subject of patent rights. ISO אינה אחראית לזיהוי פטנטים כאלה או כולם.
ISO 23559 was developed by the Technical Committee ISO/TC 61, פלסטיק, ועדת המשנה SC 11, מוצרים.
This second edition cancels and replaces the first edition (ISO 23559:2007) by slightly revising the first edition (ISO 23559:2007) by introducing an additional specimen (for low strain) for the tensile impact test specified in Table 2.
ISO 23559-2011 מדריך לבדיקת סרטי פלסטיק ויריעות תרמופלסטיות
הצג
This international standard is intended to provide manufacturers and users with guidance for testing plastic film.
Although existing standards provide this guidance for many thin film products, they are very specific in terms of the materials covered and do not address many commercial films produced as mixtures or multilayer structures. במקרים מסוימים, existing standards are limited to a single process technology for producing thin films.
It is also recognized that the general standardized concept of film sample preparation is not currently realistic due to the numerous commercial processes used to produce films and the different processing parameters required for different materials, mixtures and/or structures. מצד שני, it is possible to standardize sample preparation for clearly defined materials and manufacturing processes, but this is not within the scope or intent of this document.
Safety Statement – Persons using this document should be familiar with normal laboratory practices (if applicable). מסמך זה אינו נועד לתת מענה לכל חששות האבטחה, אם בכלל, הקשורים לשימוש בו. It is the user’s responsibility to establish appropriate safety and health practices and ensure compliance with any regulatory requirements.
ISO 23559-2011 מדריך לבדיקת סרטי פלסטיק ויריעות תרמופלסטיות
1 היקף היישום
This international standard identifies specific testing procedures to assist manufacturers and users in selecting and characterizing single – or multilayer thermoplastic films. It aims to provide a guide for films that do not have existing standards or specifications.
Note Due to the range of materials used and the variety of processes that can be used to produce various thin film structures, sample preparation is not covered in this document.
If an international standard exists for a particular film product, the requirements of that standard shall take precedence over this document.
There are many national, regional, and industry standards that address application-specific requirements. Since this international standard is intended to provide general guidance it is not within the scope of addressing these issues.
The importance and applicability of the data should be determined by the user.
2 Normative reference files
The following reference files are required for the application of this file. להפניות מתוארכות, חלות גרסאות לציטוט בלבד. לציטוטים ללא תאריך, the most recent version of the referenced document (including any amendments) חל.
ISO 307, פלסטיק – polyamides – Determination of viscosity values
ISO 527-3, פלסטיק – Determination of tensile properties – חֵלֶק 3: Test conditions for films and sheets
ISO 1133-1, פלסטיק – Determination of melt mass flow (MFR) and melt volume flow (MVR) of thermoplastics – חֵלֶק 1: Standard method
ISO 1183-1, פלסטיק – Determination of the density of non-foamed plastics – חֵלֶק 1: immersion method, liquid gravity flask method and titration method
ISO 1183-2, פלסטיק – Determination of the density of non-foamed plastics – חֵלֶק 2: density gradient column method
ISO 1183-3, פלסטיק – Determination of the density of non-foamed plastics – חֵלֶק 3: Gas specific gravity flask method
ISO 2813, צבעים ולכות – Determination of the specular gloss of 20°, 60° ו-85° סרטי צבע לא מתכתיים
ISO 4589-1, פלסטיק – Determination of combustion behaviour by oxygen index – חֵלֶק 1: Guide
ISO 4589-2, פלסטיק — Determination of combustion behaviour by oxygen index — חֵלֶק 2: ambient temperature test
ISO 4592, פלסטיק – films and sheets – determination of length and width
ISO 4593, פלסטיק – films and sheets – Determination of thickness by mechanical scanning
ISO 6383-1, פלסטיק – films and sheets – Determination of tearing resistance – חֵלֶק 1: pant type tearing method
ISO 6383-2, פלסטיק – films and sheets – Determination of tearing resistance – חֵלֶק 2: Elmendorf method
ISO 7765-1, plastic films and sheets – Determination of impact resistance by the free-fall method – חֵלֶק 1: Step method
ISO 7765-2, Plastic films and sheets – Determination of impact resistance by the free fall method – חֵלֶק 2: Instrumental puncture test
ISO 8256, פלסטיק – Determination of tensile impact strength
ISO 8295, פלסטיק – films and sheets – Determination of coefficient of friction
ISO 8296, פלסטיק – films and sheets – determination of wetting tension
ISO 9773, פלסטיק – Determination of the combustion behaviour of thin flexible vertical specimens in contact with a small flame ignition source
ISO 11357-2, פלסטיק — Differential scanning calorimetry (DSC) — חֵלֶק 2: Determination of glass transition temperature
ISO 11357-3, פלסטיק — Differential scanning calorimetry (DSC) — חֵלֶק 3: Determination of melting and crystallization temperature and enthalpy
– ISO 11443, פלסטיק – Determination of the fluidity of plastics using capillaries and slit die head rheometers
ISO 11501, פלסטיק – films and sheets – Determination of dimensional changes in heating
ISO 11502, פלסטיק – films and sheets – Determination of adhesion resistance
ISO 13468-1, פלסטיק – Determination of total light transmittance of transparent materials – חֵלֶק 1: single beam instrument
ISO 13468-2, פלסטיק — Determination of total light transmittance of transparent materials — חֵלֶק 2: Double beam instrument
ISO 14782, פלסטיק — determination of fog in transparent materials
ISO 15105-1, פלסטיק – films and sheets – Determination of gas transmittance – חֵלֶק 1: differential pressure method
ISO 15105-2, פלסטיק – films and sheets – Determination of gas permeability – חֵלֶק 2: isobaric method
ISO 15106-1, פלסטיק – films and sheets – Determination of water vapour transmittance – חֵלֶק 1: Humidity detection sensor method
ISO 15106-2, פלסטיק – films and sheets – Determination of water vapour transmittance – חֵלֶק 2: Infrared detection sensor method
ISO 15106-3, פלסטיק – films and sheets – Determination of water vapour transmittance – חֵלֶק 3: electrolytic detection sensor method
ISO 15989, פלסטיק – films and sheets – Measurement of water contact angles for corona treated films
חברת החשמל 60093, Test method for volume and surface resistivity of solid electrical insulating materials
חברת החשמל 60112, Verification and comparison of solid insulating materials – Determination of leakage trace index
חברת החשמל 60243-1, Electrical strength of insulating materials – Test methods – חֵלֶק 1: power frequency test
חברת החשמל 60250, recommended method for determining the dielectric constant and dielectric loss factor of electrical insulating materials at power, audio and radio frequencies (including meter wavelengths)
ASTM D882, Standard Test Method for Tensile Properties of Thin plastic Sheets
ASTM D5458, Standard Test method for Peel Adhesion of Stretched Packaging Film
ASTM D5459, Standard Test Method for Longitudinal Elastic Recovery and Permanent Deformation and Stress Retention of Stretched Packaging Films
ASTM D5748, Standard Test method for Resistance to Protruding Puncture of Stretched Packaging films
ASTM F88, Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM F1921, Standard Test Method for Thermal Sealing Strength (Thermal Viscosity) of Thermoplastic polymers and Blends Containing Flexible Web Sealing Surfaces
3 מונחים והגדרות
למטרות מסמך זה, המונחים וההגדרות הבאים חלים.
3.1 Thin Film
Films of nominal thickness not greater than 0.25 מ"מ
Entry Note 1: Although not specifically defined in ISO 472, the 0.25mm limit is noted. ASTM D883 specifically defines thin films as ≤ 0.25mm.
הערה 2 Sheets with nominal thickness greater than 0.25mm May be too hard to use a test method more suitable for thinner structures.
רק מדור המידע הסטנדרטי הוא ציבורי. לצפייה בתוכן המלא, אתה צריך לרכוש את התקן דרך הערוצים הרשמיים.