ISO 6503-1984 “צבעים ולכות — קביעת תכולת הלידים הכוללת — ספקטרומטריית בליעת אטום להבה”

הַקדָמָה
ISO (הארגון הבינלאומי לתקינה) היא ברית גלובלית של גופי תקינה לאומיים (גופים חברי ISO). פיתוח תקנים בינלאומיים מתבצע בדרך כלל באמצעות ועדות טכניות של ISO. כל מוסד חבר המעוניין בנושא שעליו הוקמה ועדה טכנית זכאי להיות מיוצג באותה ועדה. ארגונים ממשלתיים ולא-ממשלתיים בינלאומיים המקיימים קשר עם ISO מעורבים גם הם בעבודה זו.

Draft international standards adopted by technical committees are circulated to member bodies for approval before being accepted as international standards by the ISO Council. They are approved under the ISO process, which requires at least 75 per cent approval from voting member bodies.

The international standard ISO 6503 was developed by the Technical Committee ISO/TC 35 עבור צבעים ולכות.

1 Scope and domain of application
This standard describes a flame atomic absorption spectrometry method for the determination of total lead in paints and related products.

This method is suitable for products with total lead content in the range of approximately 0.01 ל 2% (m/m).

הערה – This method is also suitable for products with total lead content greater than 2 % (m/m), but should only be used if the accuracy does not exceed the appropriate value given in 7.2.

Two methods to deal with the test part are given. In case of dispute, the dry ash method (Clause 4) shall be used as the method of adjudication.

To determine lead in test solutions, the dithiazole spectrophotometry specified in ISO 3856/1 May be used as an alternative method.

ISO 6503-1984 “צבעים ולכות — קביעת תכולת הלידים הכוללת — ספקטרומטריית בליעת אטום להבה”

2 חומרי עזר
ISO 385/1, burette for laboratory glassware – חֵלֶק 1: דרישות כלליות.

ISO 1042, Single label volumetric bottles for laboratory glassware.

ISO 1512, צבעים ולכות — דְגִימָה.

ISO 1513, צבעים ולכות — בדיקה והכנת דוגמאות מבחן.

ISO 3696, Laboratory water – מִפרָט.

ISO 3856/1, צבעים ולכות – קביעה של “מָסִיס” תכולת מתכת – חֵלֶק 1: Determination of lead contentFlame atomic absorption spectrometry and dithiazole spectrophotometry.

ISO 5725, Accuracy of test methodsDetermination of repeatability and reproducibility by inter-laboratory testing.

רק מדור המידע הסטנדרטי הוא ציבורי. לצפייה בתוכן המלא, אתה צריך לרכוש את התקן דרך הערוצים הרשמיים.

שתף את הפוסט