Abstrak

This specification covers film, jenis kertas dan kain pita sensitif tekanan dan diterapkan pada kemasan, box LIDS and seals. This specification covers five types of tape: tahan air, weather-resistant, polyester-supported tape (Tipe I), water-resistant polyester-supported tape (Type II), water-resistant polypropylene supported tape (Tipe III), water-resistant woven fabric straps (Type IV) and weather-resistant paper straps. Tape should be manufactured using film, paper or cloth as backing and coated with a smooth and evenly distributed layer of pressure-sensitive water-insoluble adhesive. The tape should be rolled over the paper fiber or plastic core, and should be free of defects, and the edge should be clean, straight and unbroken. Test adhesion, kekuatan putus, ketahanan sobek, ketebalan, water permeability,

Ringkasan ini merupakan ringkasan singkat dari standar acuan. Ini hanya bersifat informasi dan bukan merupakan bagian formal dari standar; The full text of the standard itself needs to be used and applied for reference. ASTM tidak memberikan jaminan, tersurat maupun tersirat, dan tidak menyatakan bahwa isi abstrak ini akurat, menyelesaikan, atau baru.

Melangkah 1: Cakupan

1.1 This specification covers film, paper and cloth pressure sensitive tape for box closure and sealing.

1.2 Values expressed in inch-pounds or SI units shall be treated as standards separately. Nilai yang ditentukan di setiap sistem mungkin tidak sama persis; Karena itu, setiap sistem perlu digunakan secara independen dan nilai-nilainya tidak dapat digabungkan dengan cara apa pun.

1.3 The following safety hazard warnings apply only to Section 14 “Metode tes” dari spesifikasi ini. Standar ini tidak dimaksudkan untuk mengatasi semua masalah keselamatan yang terkait dengan penggunaannya. Merupakan tanggung jawab pengguna standar ini untuk menetapkan keselamatan yang sesuai, spesifikasi kesehatan dan lingkungan dan untuk menentukan penerapan pembatasan peraturan sebelum digunakan.

1.4 Standar internasional ini didasarkan pada prinsip-prinsip standardisasi yang diakui secara internasional yang ditetapkan dalam Keputusan Prinsip-Prinsip Pengembangan Standar Internasional, Pedoman dan Rekomendasi yang dikeluarkan oleh WTO Technical Barriers to Trade (TBT) Komite.

ASTM D5486/D5486M-2020 “Spesifikasi Standar Pita Sensitif Tekanan untuk Kemasan, TUTUP dan Segel Kotak”

2. Lihat berkasnya

Federal regulation

FED-STD-595

PPP-T-60 Tape: Packaged, waterproof available from the Standardization document ordering desk Bldg. 4 D Block, 700 Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.

TAPPI standard

Internal Tear Resistance of T 414 kertas (Elmendorf-type method) is available from the Pulp and Paper Industries Association (TAPPI), 15 Technology Parkway South, Norcross, GA 30092, http:// www.tappi.org.

standar ASTM

D996 Ketentuan lingkungan pengemasan dan distribusi

D1974 Practice of methods for sealing, sealing and reinforcing fiberboard boxes

D2860 / D2860M Test method for bonding pressure-sensitive tape to fiberboard at a 90 degree Angle and under constant stress

Test method for peel adhesion of D3330 / D3330M pressure sensitive tape

D3611 pressure sensitive tape accelerated aging practice

Test method for thickness of D3652 / D3652M pressure sensitive tape

Metode pengujian adhesi geser D3654 / Pita sensitif tekanan D3654M

D3715 / Praktek jaminan kualitas pita sensitif tekanan D3715M

Test method for breaking strength and elongation of D3759 / D3759M pressure sensitive tape

Test method for unwinding force of D3811 / D3811M pressure sensitive tape

D3815 / D3815M Practice of accelerating weathering of pressure sensitive tape through open flame carbon arc exposure equipment

Test method for water permeability of D3816 / D3816M pressure sensitive tape

Test method for water vapor transmittance of D3833 / D3833M pressure sensitive tape

D3951 Commercial packaging specification

D4727 / D4727M Specification for corrugated and solid fiberboard sheets (container grade) and cut shapes

D5570 used as a test method for water resistance of tapes and adhesives for box covers