Industrial oven is a kind of equipment used for baking, drying, curing, heat treatment and other operations of large quantities of materials. It has a large studio volume and a high-power heating system that transfers heat quickly and evenly to the surface of the material for fast, efficient heating and handling.

Industrial ovens are usually composed of a heating system, a circulating fan, a control system, a studio and an inlet and outlet device. Heating systems usually use electric heating elements, gas furnaces, or steam heating to heat the air to a set temperature. The circulating fan can circulate hot air to improve thermal efficiency and baking effect. The control system can accurately control parameters such as temperature, humidity and time to meet the processing needs of different materials. The design and construction of studios and in-and-out devices also vary according to different use scenarios and material requirements.

Industrial oven common problems and solutions

Q&A
Temperature control is unstable.

The temperature is too high or low.

Uneven heating.

The oven door is not tightly sealed.

Too much noise.

solution
Temperature control instability: Check the working status of the temperature controller and the position of the sensor to find whether the controller or sensor is faulty or needs to be replaced. The problem can be solved by replacing or repairing the relevant parts, or readjugating the temperature control parameters.

If the temperature is too high or too low, check whether the heating power of the device meets the requirements and whether heating components are faulty or need to be replaced. You can adjust the heating power and temperature of the device, or replace the heating components as required.

Uneven heating treatment: Check the working status and position of the heater to see whether the position and heating time of the heater need to be re-adjusted so that the items in the equipment can be evenly heated.

Improper sealing of the oven door: Check the sealing performance of the oven door to check whether the sealing strips are aging or need to be replaced. The problem can be resolved by replacing or servicing the relevant parts, or by readjugating the oven door.

Troubleshooting: If the device makes too much noise, check whether the power voltage and ground cable of the device are normal, and whether the heater or blower is faulty or needs to be replaced. The problem can be resolved by replacing or repairing the relevant parts, or repositioning the equipment.

The North and south tides remind you that industrial ovens require regular calibration and maintenance. At the same time, it is necessary to regularly clean the inside of the equipment, check the performance and condition of the heater, controller, sensor and other equipment, and timely replace or repair the faulty parts. In addition, it is recommended to maintain the device according to the operation manual and maintenance guidance provided by the manufacturer to ensure long-term stable operation of the device.

Industrial oven common problems and solutions

Matters needing attention
In the process of using industrial ovens, you also need to pay attention to the following points:

Arrange the placement of the goods to be baked reasonably to ensure that the goods to be baked can be evenly heated and distributed.

Do not accumulate too much debris or items to be baked inside the oven to avoid equipment overload or overheating

Ensure that the device is well ventilated to avoid damage or fire caused by overheat or overload.

When using the device, follow the instructions and safe operation procedures to ensure safe and reliable operation.

When using the equipment, avoid placing wet items directly into the oven for heating to avoid equipment failure or damage due to excessive steam.

When using the equipment, care should be taken to avoid excessive baking, so as not to affect the quality and performance of baked goods.

In short, the industrial oven is a commonly used heating equipment, and it is necessary to pay attention to the use and maintenance of the equipment to ensure the stability and service life of the equipment. At the same time, it is necessary to perform regular maintenance according to the manufacturer’s instructions and maintenance guidance to ensure the long-term reliable operation of the equipment.