ASTM D6083-2021 Specifiche standard per rivestimenti acrilici liquidi per coperture

abstract
This specification covers the testing and material properties of water-dispersed protective roof coatings composed of water-based acrylic latex elastic emulsion polymers, where a variety of pigments and other additives are added to provide the desired physical properties. The manufactured product shall be in liquid form and may be applied to the roof surface by brushing, scraping, rolling or spraying. Its application guide is not discussed here. The coating must be tested and meet the liquid characteristics required for solid viscosity, volume and weight. al contrario, the film should also conform to the physical properties of drying as follows: initial elongation at break; Initial tensile strength under maximum stress; The final elongation at break after accelerated weathering; Through; Edema; Adhesion force; Fungal resistance; Tear resistance; And low temperature flexibility after accelerated weathering.

allineare
1.1 This specification covers liquid application of water-dispersed acrylic latex elastic protective roofing coatings.

1.2 This specification does not provide guidance for application.

1.3 Values expressed in SI units or inch-pound units shall be treated separately as standard values. The values specified in each system may not be completely equivalent; Perciò, ciascun sistema dovrebbe essere utilizzato indipendentemente l'uno dall'altro. Combining values from two systems may result in nonconformity.

1.4 Questo standard non è destinato a rivolgersi a tutti, se presente, problemi di sicurezza associati al suo utilizzo. È responsabilità degli utenti di questo standard stabilire una sicurezza adeguata, pratiche sanitarie e ambientali e per determinare l'applicabilità delle restrizioni normative prima dell'uso.

1.5 Questo standard internazionale si basa sui principi di standardizzazione riconosciuti a livello internazionale stabiliti nella Decisione sui principi per lo sviluppo di standard internazionali, Linee guida e raccomandazioni emesse dal comitato dell'OMC sugli ostacoli tecnici al commercio.

Condividi questo post