Riepilogo delle principali prestazioni del rivestimento impermeabile JS e dei suoi strumenti di prova
Il rivestimento impermeabile JS è una sorta di emulsione polimerica, pigmenti inorganici, riempitivi, additivi e altre principali materie prime, after mixing, grinding, dispersion and other processes made of a waterproof coating. Ha una vasta gamma di applicazioni, can be used in building roof, basement, tunnel, pool and other projects in the waterproof coating, with good waterproof performance, lunga durata, convenient construction and other advantages.
Test performance and equipment
Prestazioni chiave | Instruments and equipment |
---|---|
Thickness of film | Thickness gauge |
Forza di adesione | Tester di adesione |
Impermeability resistance | Impermeability tester |
Forza della tensione | Macchina per prove di trazione |
Resistenza agli agenti atmosferici | Weather resistance test box |
Durabilità della vita | Artificial climate aging box |
Stability of storage | Visual inspection |
Riepilogo delle principali prestazioni del rivestimento impermeabile JS e dei suoi strumenti di prova
Fase di rilevamento
Film thickness detection: select the area of flat coating surface, use a thickness meter to measure, measure multiple points and take the average value.
Prova di adesione: according to the standard operation, the adhesion detector is clamped on the coating surface, and the force is gradually applied until the coating peeling and peeling occur.
Impermeability test: the coating sample is placed in the impermeability tester, and the permeability test is carried out under pressure to observe whether the permeability phenomenon occurs.
Tensile strength test: Select the area with flat coating surface, make standard sample, use tensile testing machine for tensile test, record the maximum tensile strength value.
Riepilogo delle principali prestazioni del rivestimento impermeabile JS e dei suoi strumenti di prova
Prova di resistenza agli agenti atmosferici: the coating sample is placed in the weather resistance test box, and the environmental simulation test such as light, heating and water mist is carried out for a certain period of time to observe whether the coating falls off, cracks and fades.
Durability test: the coating sample is placed in the artificial climate aging box, and the environmental simulation test such as heating, ultraviolet irradiation and humid heat cycle is carried out for a certain period of time to observe whether the coating falls off, crepe, fading and other phenomena.
Storage stability test: For the paint stored for a certain period of time, use visual inspection to observe whether there are changes in its appearance, stratification and other phenomena.