Introduzione della macchina per prove di usura TABER:
Questa macchina viene utilizzata per test di resistenza all'usura della pelle, stoffa, colore, carta, piastrella del pavimento, compensato, bicchiere, natural rubber, eccetera. The method is to cut the specimen with a standard cutter, wear it with a specified type of grinding wheel, load it with a certain weight, and take out the specimen after the specified number of revolutions, observe the condition of the specimen or compare the weight difference before and after the test. Mainly test the wear resistance of the material, wear resistance with two standard small grinding wheels, calculate the importance of the material and see if there is damage after grinding.
Mainly used in leather, pelle, stoffa, colore, carta, floor, compensato, bicchiere, natural rubber suitcase, carpet, vestiario, bicchiere, plastic coating, ceramic tile, metal coating, colore, vernice, decorative sheet, high pressure sheet, plastica, tessile, elastic floor mat, traffic paint, anodized layer, blankets, electronic components, decorative board, wax, etichette, leather cases, materiali dentali, Automotive interior decoration, resina, furniture and research laboratories; Commodity inspection arbitration, dipartimenti di supervisione tecnica, eccetera. to detect the performance of leather products.

TABER wear testing machine calibration steps:
Fare un passo 1, set the rated revolution of the counter to 60r/min:
Fare un passo 2, press the RST key to clear the counter;
Step 3,Press the start button and start the stopwatch at the same time.
Fare un passo 4, the counter records to 60 giri al minuto. The testing machine automatically stops, stops the stopwatch time;
Fare un passo 5, Record stopwatch time:
Repeat steps 2 A 5 Sopra, both times should be within the range of 60s±2s.