意味と使い方
5.1 The information provided by this test method can be used for material specifications for product design and quality assurance applications. Can be used to compare different products.

5.2 The use of the test method must be related to the test purpose. One purpose is to determine the relative strength of the tape at the time of purchase or use. Another aim is to identify or characterize a specific backing material.

5.2.1 The test may be performed on the received tape, つまり. the material is not cut into a sample width less than the received width. 一般的に, tapes wider than 48 んん [2 で] are not tested, mainly due to equipment limitations. Tape that is about 3 んん [0.125 で] narrow can be tested.

5.2.2 Tests may be performed on samples cut within the boundaries of the sample material using a sharp razor, such as the blade defined in Section 6. This method is commonly used for material characterization, determining consistent quality, and conforming to specifications.

5.3 Elongation at break or tensile properties up to a specified elongation may be related to the intended use of the tape or to its use in identifying or characterizing the material.

ASTM D3759/D3759M-2019 “感圧テープの破断強度および伸びの標準試験方法”

ステップ 1: 範囲
1.1 This test method covers the measurement of the breaking tensile strength (破壊強度) and tensile properties (伸長) of pressure-sensitive tapes and labels. It includes programs for machine orientation and transversal, high strength filament reinforced backing and high elastic backing. It also includes the process of obtaining the force (” F “価値) of the specified elongation. These programs use a constant rate of expansion (CRE) type test machine.

1.2 Values expressed in SI units or inch-pound units shall be regarded as standard values respectively. 各システムで指定された値は完全に同じではない可能性があります; The conversion between measurement systems needs to be done carefully.

1.3 この規格は、その使用に関連するすべての安全上の懸念に対処することを目的としたものではありません。. 適切な安全性を確立するのは、この規格のユーザーの責任です。, 健康および環境仕様を確認し、使用前に規制制限の適用可能性を判断するため.

1.4 この国際規格は、国際規格開発の原則に関する決定で確立された国際的に認められた標準化原則に基づいています。, WTO が発行したガイドラインと勧告 貿易の技術的障壁 (未定) 委員会.

ASTM D3759/D3759M-2019 “感圧テープの破断強度および伸びの標準試験方法”

2. ファイルを参照してください
AFERA document (European Manufacturers Association, European Adhesives Association, Europe

事件 4004 Measurement of the breaking strength of self-adhesive tape

事件 4005 Self-adhesive tape elongation measurement

PSTC Paper (Pressure Sensitive Tape Committee)

Tensile strength and elongation of PSTC 131 pressure sensitive tape

European Specification (で) document

で 1940 Measurement of the breaking strength of self-adhesive tape

で 1941 Measurement of elongation at break of self-adhesive tape

ASTM規格

D828 Test method for tensile properties of paper and paperboard using constant elongation equipment

D882 Test method for tensile properties of plastic sheet

D996 包装および流通環境条件

D3715 / D3715M 感圧テープの品質保証実践

D4332 Practice of regulating containers, packaging or packaging components for testing

E4 testing machine force verification convention

E122 Practice of calculating sample sizes to estimate average values of batch or process features with specified precision